hi
for the time it takes to swap and the price of a new new 1 i would go with a new 1
i changed my mates last week in less than half hour including bleeding
regards brian
hi
i would be looking at the vented discs to see if they are cracked on the centers and opening up
i had this on a ford granada coupe but after a bit of head scratchin i found the problem to be the discs opening up but mainly
when they was warm
hth brian
hi guys
hope some 1 can help
my mates 2000 td5 starter motor just clicks on the solenoid
is there a easy repair or is it a new starter
thanks in advance
brian
it
must be the month of slave cylinders leaking
as i have just changed my mates on his td5
10 minute job including bleeding it
if only everything was so easy lol
hi chris
thanks for that
mine has a bit of side to side but when i spin it by hand it doesnt whirr or rattle
it is quite smooth so maybe it is ok
i will just keep a eye on it for the next week or 2
thanks again
hi
how easy is it to change the bearing in a 300 fan belt tensioner
as i was changing the water pump today i noticed that there is quite a bit of play
in mine
thanks in advance
brian
hi
just a update
not heard anything else back from mantec yet
they started off keen but lost there steam
let you know if they find time to email back
brian
hi
changed the seals today in situe
it was a bit of a job getting the old metal 1 out.
but appart from that all went ok
all fingers are crossed and hope its done the trick
thanks for all the feedback guys
brian