zeerover

You don't need a tool, a torch and eye will do. Beter a little to soon than to late.

I want a tire in this size and even good as the BF Goodrich AT, suggestions?

Here some pictures. https://www.flickr.com/photos/67443370@N07/sets/72157628021727364/

A broken piston.

Put on a TD manifold, works for me.

Found, but delivery date half May. I go for new pistons.

Turners can't help.

The AE partnumber is R45000 0.20 but what is the rover number

Does someone know the part number for the piston rings from the AE pistons first oversize (+0.20)? Can i use the kolbenschmidt rings partnumber RTC645720?

After greenlaning in France, very cold conditions. My steering wheel was out off center. Nothing was bent or lose. The only option is, that the internal manual steeringbox has skipped a tooth. mayby it's possible when there is a great force at the pitman arm when the box is in turning position at the opposit direction. Knowing that( there is always play when turning. Did someone had the same experiance?

I have the parts list in pdf, i can send it by e-mail

Does someone know how to set the timing correct with a gauge? Does someone has the correct bosch data.

Check the earth from the engine to the chassis first.

Not always! But i rest my case.

Checking is not so expensive and i know that bad timing can cause blue smoke, there not so much difference between unburnt oil or diesel.

Check the injection timing first!!! Or the injection blue smoke is not always burned oil

It's in one piece.

It's a radiator like this. http://www.ebay.ie/itm/LAND-ROVER-DEFENDER-DISCOVERY-RR-200tdi-RADIATOR-/280640038644?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item41577326f4 I've sent an email to Paddocks, I hope they find a solution

Thank you, but you refers to the original adapter that screws in the radiator, this is not possible to this radiator.

I have bought a new radiator from Paddock, its a plastic one, this does not fit a 200tdi disco '89 because the oil cooler pipes don't fit. So i need these adaptors. http://www.benl.ebay.be/itm/300602085093?ru=http%3A%2F%2Fwww.benl.ebay.be%3A80%2Fsch%2Fi.html%3F_from%3DR40%26_trksid%3Dm570%26_nkw%3D300602085093%26_sacat%3DSee-All-Categories%26_fvi%3D1&_rdc=1 Someone know the part number?

If it is EP0 than it's okay. You can mix it with 80w90

"I have an '87 Ninety and have just done the rear brakes. The springs should be attached top and bottom to both shoes, not the backplate. So your top spring doesn't look right." Your wrong, the pictures showing the correct set up!

The same as the other 3 . After honing no traces.

The bore is ok just honing is needed.

Check your timing belt! And timing.