Jump to content

goaty

Settled In
  • Posts

    108
  • Joined

  • Last visited

Everything posted by goaty

  1. sorry went a long time ago.

    cheers

  2. sorry went a long time ago.

    cheers

  3. i am up for some mud fun too, will have mot and tax asap but need to test her before the next challenge. I am in Redhill so not far away. When is next outing happening?? cheers guys
  4. Hi, Just as i thought my truck was ready again, the injection pump has sprung a leak. It is leaking from where the throttle spindle gos into the pump.... Its not massive leak but it is leaking, does anyone know if i can undo the throttle linkage and remove the spring etc to replace a seal or O ring?? really need to sort it for Sunday's outing..... Cheers in advance guys. Joe
  5. Hi, after having some '35' fedima's that actually measured 36.75 does anyone know what the 285/75R16's truely come out at?? this is in the Sirocco pattern..... I read that they shoul dbe 33.5in but has anyone actually had them to measure themselves? cheers in advance joe
  6. Hi, Need to getone ordered and am going to fit a rear winch hiden under the floor at the same time, does anyone know a price for the MIB components rear winch tray with extensions for a 90?? will call them 2mo but thought i'd see if anyone knew now?? If not i just end up buying a standard one from where ever and adding all the bits to it myself....lol. cheers joe
  7. Hi, Can anyone advise me....I bought a replacement diff for my 24spline axle but it arrived and has a 3 bolt flange attached to it. I have managed to remove the centre pin but instead of the 24mm nut to undo there was a 15mm bolt.... Can anyone tell me what the diff could be off and will it work with my 4 bolt flange?? I would need to use a big washer to hold the flange on. hope someone can hlep. cheers joe
  8. Hey guys, Sorry we got held up on the way over and got to the car park just after midday. I think we did bump into you briefly at the top of the steps but i was busy trying to fix my transfer linkage issue, once i had it sorted you had started to head down. Shame as it would of been nice to chat, and yeah weather was a bit on off though. Great fun over there, steps weren't an issue for the 90, enough fun though. L200 that came with us was a major drag, took an hour of pissing about to get it over the steps seeing as it 20feet long. when did anyone fancy another chance to meet? We are going to Boxgrove in couple of weeks..... cheers
  9. we will be there for about 10:45 depending on how well everyone meets me at 10, take about 45mins to get over. see you 2mo
  10. its all good, thats the way i fit them yesterday just wanted to check before i give it too much abuse. So far i am very happy with it, first time its been off axles stands in over 4 weeks.
  11. i a mkhopinh to get the OS map later on today so shouldn't get to lost. As for pics i dont have a cam yet, thats going to be my Bday prezy soon Rob, we will have to sort another day out soon anyway, i would like to be able to meet a few more owners, We are also going to Boxgrove on the 14th of Sep if anyone can. Its wicked down there.
  12. Hi, Can anyone confirm which way round you clamp these down?? It says outside on two sides, one with the smaller side of the cone on the outer edge. The other on the side of the turret upright. Anyone know?? cheers
  13. Well guys good to hear more wana join. We are going down Sunday and can meet anyone at 11 at the Cafe if you fancy it. Hoping to pick up an OS map if i get the chance so we know where were going. PM me if you wana come with number etc. Cheers Joe
  14. i will have a word with the lads to see but it all depends upon my challenge kit arriving from David at Llama, it should of been here today. 90 still on axle stands till it gets here, hoping to do it 2mo eve. Wont take long. What time you thinking?? 12noonish?? cheers
  15. hey guys, thanks for all the info, i am hoping to go over there on Sunday as long as my challenge kit arrives 2mo so i can fit it on. Got a few mates coming along tooso anyone that fancys it just let me know, always happy to meet new landy owners. Do i get off at the Hindhead junction and go to the north side of it?? I am coming from Reigate so guildford side of things, probably coming past Gomshall etc. thanks again joe
  16. Hi everyone. I have recently seen some vids of people laning the Devil's Punchbowl in Hindhead, Surrey. Looks liks good fun so hoping someone on here has been and can give me osme directions of where abouts the lanes are, seen a few different ones by the looks of it. Any info would be great, or company along the way. cheers goaty
  17. cool, thanks guys. I had a look at mine a little ealier and could see marking on it to indicate this so sorry for posting before checking. Was at work so made it little easier so i knew for when i got home. cheers again guys
  18. Hey, Can anyone tell me how to fit a 300tdi alternator to a 200?? It has three connectors on the back, B+ D+ and W My 200tdi only has a big wire and one small wire going to it. Any help would be great. thanks
  19. cool, thanks for all the input. I hoping the front wont really have a problem as i still have standard radius arms on. Not looking to be changing them yet though so hopefully they will limit it before the prop has issues. Rear is all sorted now, ideally a double cardon is next purchase
  20. well i got the rear on its way now, front i want to see how runs for now. And i not going as extreme as 3 inch as i dont really need it that high, but i would imagine it will give issues on uj's and diffs
  21. what was that about? got bord after clicking the button?? lol
  22. Hi, Looking at options for rear springs for my 90. I have a winch up front and a steering guard to add some weight to my 200tdi. I am after a 2 inch lift or near enough and am thinking of using the RR hd springs up front after reading quite a few posts it looks like a good option. As for the rear the RR hd's dont look like they would be good enough so after looking at the spring spec list (http://members.shaw.ca/jbarge/springinfo.html) i was possibly thinking of the disco hd (winch) fronts. They are slightly longer on free length and a touch stiffer too (part no: NTC8477), has anyone had experience of these, or even tell me if the info on the spec list is correct??? My van back 90 currently has some blue +2 springs on but they are really tired and sagging so have to go. It has been mentioned it may be worth trying my old rears on the front as with the winch etc it coudl work well. Anyone have an opinion?? Thanks in advance joe
  23. Thanks for the offer, i am going to get a rear one ordered as i recon it really will need it straight away. The front i will leave to see so if you do have the front on offer at somepoint i will definetly be very interested in taking it. cheers again joe
×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy