Jump to content

GARY ANDREWS

Settled In
  • Posts

    32
  • Joined

  • Last visited

Reputation

0 Neutral

Profile Information

  • Location
    southampton
  1. MOV_0182.mp4 here the conversion 0m605 in disco 2. alarm goes off when key is turned on thats the first thing to sort anyone
  2. great advise thank you all keep it coming. have fitted the mercedes om605 with 3.9 auto and no electrics to go wronge.
  3. hi trying to fit non td5 engine in disco 2 would like to get as much working on car as poss , is there anyone who has done this that know how to beat the electrical night mare of getting things working again i.e. alarm speedo rev counter abs etc
  4. having probs with starting an engine i replaced. had a mate bring round his diag machine and when he put it on to pick up crank sensor ,when we turned it over there was no reading,so i swop one out of mine and still nothing .im guessing broken wire or plug maybe .any light on this should it have a reading just cranking it ,any help will be good cheers gary
  5. got a **** load of hoses on my truck to have made ie two saley winches and four wheel steer,can anyone do them on the cheap pm me cheers gary
  6. thanks for that boys, land rover has been found in near botley train station cheers gary
  7. 305 16 BFG MUDS,35 13.5 16 MUDZILLAS ON BLACK 10X16 MODS,COOPERS ST ON SILVER MACH 5S SALEY WINCHES, 8275S,MACH 5 WITH 38 BOGGERS,ERCOLINA TB60 TUBE BENDER,PROTOOL HYDRAULIC BENDER AND A HYDRAULIC PUSH BENDER 350 AMP 3 PHASE LINCOLN WELDER 271 AMP LINCOLN 240 WELDER LINCOLN PLASMA AND A DRAG GUN PLASMA SNAP ON TOOLS 4X 2" COILOVERS IN BLACK SILVER SPRINGS 8X2.5 COILOVERS ONE BLUE OTHER RED SPRINGS,DISCO INTERCOOLER ALLOY SPORT BLUE DEFENDER 90 NEW BLUE PAINT AND MORE ANY HELP WOULD BE GOOD PLEASE RING GARY ON 07711879393 01489808289
  8. i have a 03 disco td5 and its on limp mode from start then sometimes after awhile it gets its power back and runs ok , any ideas
  9. got apair of spider trax cases and i cant get that number to work
  10. hi steve long been a while im fine still struggling on what to build but next in line is putting axles together.might put them under the 90 4 now till i know what all the new rules are going to be. will check them out cheers hows it going with u gary
  11. any one know best place to get half shafts re splined cheers gary
  12. to make an auto complete put a underdrive on it, you crawl down hill and have your wheels turn at winch speed
  13. cheers for that dave, up for more info if its out there
  14. what do you have to do if you havent got the speed sensor connected to the ecu if anything on a 3.9 rover v8.what difference will it make without it cheers gary
×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy