Jump to content

DC_

Long Term Forum Financial Supporter
  • Posts

    1,161
  • Joined

  • Last visited

  • Days Won

    10

Posts posted by DC_

  1. Got my RRC 2 years ago for £1600 on LPG. Had a few running probs to start (fingers crossed) it's running sweet as a nut now.

    Great condition, only rough spot is the boot floor which will eventually get sorted (after i'v finished my house)

    Would love to see pics of this 5.5K motor.

    I suspect someone is seriously at it!!

  2. Mate just rang me about his 90. 1989 2.5Turbo Diesel

    Usually everything is ok but today he went out to start her up and found that the glow plug light on his dash wasn't coming on. So after checking his wiring and anything else he can think of, he said he just kept turning it over and over and it eventually started.

    Any ides folks what can be the problem of the light not coming on?

    He's also checked all fuses.

    Speedy answer or suggestion would be great as we have a forest drive on soon..

    DC

  3. When i took my covering of to find a leak a few months ago, i'm sure i seen a relay for the heated screen. It was in the drivers cockpit area, remove the covering right next to the GAS pedal, there's a bunch of them in there that i'm sure where marked.

  4. now i'm really going to follow this thread with detail.

    LPG will make your engine hotter when running. This will expand the cylinders more and will make the noise louder??

    If you run it on petrol for a while, say about 25 mins or so, does the tapping go away? If you round around at 30mph does the tapping stay away? does the tapping return when you make the engine work harder say at 50-60mph?

    One theory might be that when on LPG the cylinders expand more but also as it burns cleaner, there's no deposits to "block" u the leaky gasket.

    So it it goes quieter on petrol this might be the case.

    Hope that helps David,

    Keep us informed.

  5. David, yes as the lads say exhaust manifolds, sounds very similar to tappets. Are you on LPG or petrol? When it heats up if your on petrol, it's been suggested that the build up of carbon deposits may plug the leaking slightly and this is why maybe it's less noisy.

    Get it off, get some asembly paste on it with new gasket and hopefully that'll be it gone.

  6. Thought i'd post this in a few sections as i know there maybe similar faults.............

    Alright guys, thought i would post this as no doubt there might be a few thoughts.

    Sigh........................

    Took the RRC for it's first test drive after getting it running again after the wires fried last weekend. So, after starting it after we sorted it, it started and ran fine in my opinion from what i am used to. However, starting it tonight it took 2 turns which is unlike it. Then fired up but reved up a bit higher than normal before spluttering and coming to rest back to normal revs. When i started the run it did chug a bit. So, getting onto the main 60mph road towards the next town,i got to about 55mph then it started to cough and splutter then cut out. Battery lights never came on straight away but after about 15-20 secs they did. So managed to roll into the side safely, Checked if it would crank over which it did, then checked all wiring for anything suspect. After a few mins i tried again, nothing, like it wasn't getting either a spark or fuel. Had a little wiggle round at the coil and checked all fuses for fuel but all seemed fine. Tried her again, and she fired up, but this time it sounded better with no coughs.

    So, got to the next town and sat in line at the traffic lights, few mins later,after setting off, the battery light came on. Drove for about a minute, and it went back off. Then came back on and stayed on until i got to a car park. Took out the multi meter while it was running and the battery wasn't getting the 14 volts as it was when Nick tested it during the week after getting it up and running again.

    Tested the volts coming out of the ALT, and still only 12 volts. One thing i did notice was the ALT was very hot indeed, i don't know if this was due to the LPG cooling pipes being a little close to it, or should it be that hot??

    So went into the shops for about 20 mins. Came back to start her up and she did. Battery light was out and the multi meter was reading 14 volts now coming out and getting to the battery???

    Blooming landies i tell ye !!!

    Drove 7 miles to get home and all was fine.........................

    I think I'm for getting rather pi$$ed tonight ;)

    I'm going to replace the wire from ALT to solenoid as i think this may have been damaged or on its way out?

    Got another coil that i'm going to try also incase the one on it has been damaged and isn't performing under load?

    New ALT by the way. Don't know if they nice AA men wired it up correctly when they changed over the old one?

  7. Alright guys, thought i would post this as no doubt there might be a few thoughts.

    Sigh........................

    Took the RRC for it's first test drive after getting it running again after the wires fried last weekend. So, after starting it after we sorted it, it started and ran fine in my opinion from what i am used to. However, starting it tonight it took 2 turns which is unlike it. Then fired up but reved up a bit higher than normal before spluttering and coming to rest back to normal revs. When i started the run it did chug a bit. So, getting onto the main 60mph road towards the next town,i got to about 55mph then it started to cough and splutter then cut out. Battery lights never came on straight away but after about 15-20 secs they did. So managed to roll into the side safely, Checked if it would crank over which it did, then checked all wiring for anything suspect. After a few mins i tried again, nothing, like it wasn't getting either a spark or fuel. Had a little wiggle round at the coil and checked all fuses for fuel but all seemed fine. Tried her again, and she fired up, but this time it sounded better with no coughs.

    So, got to the next town and sat in line at the traffic lights, few mins later,after setting off, the battery light came on. Drove for about a minute, and it went back off. Then came back on and stayed on until i got to a car park. Took out the multi meter while it was running and the battery wasn't getting the 14 volts as it was when Nick tested it during the week after getting it up and running again.

    Tested the volts coming out of the ALT, and still only 12 volts. One thing i did notice was the ALT was very hot indeed, i don't know if this was due to the LPG cooling pipes being a little close to it, or should it be that hot??

    So went into the shops for about 20 mins. Came back to start her up and she did. Battery light was out and the multi meter was reading 14 volts now coming out and getting to the battery???

    Blooming landies i tell ye !!!

    Drove 7 miles to get home and all was fine.........................

    I think I'm for getting rather pi$$ed tonight ;)

    I'm going to replace the wire from ALT to solenoid as i think this may have been damaged or on its way out?

    Got another coil that i'm going to try also incase the one on it has been damaged and isn't performing under load?

    New ALT by the way. Don't know if they nice AA men wired it up correctly when they changed over the old one?

  8. OK, after doing a bit of reading, research and bugging folks. I'm now gona check earth connections from starter motor. Can anyone confirm if my Truck would have a fuseable link in the wiring loom? It's been suggested that this may have either, corroded, or melted.

    So at least i have a few leads.................................god dam, sound like the CID :)

  9. Hello again to you all.

    It seemed for a while everthing was good with the RRC.

    After completing the MAC 4x4 Challenge in March, and a new altenator being fitted by those nice men in yellow all seemed well.

    Went a trip last weekend and a couple of times the battery light came on but then went off again within a few mins.

    So i was planning on cleaning all the solenoid connections today for my forest run that's on tomorrow.

    Started the job yesterday evening by losening off the connections on the solenoid but decided today to go get fuel first before doing the job on it. So, i tightened up the connections again and went to start her up. Ignition lights came on ok as usual, then when i turned it over, the starter cranked over but there was a crackling noise and when i looked, there was smoke coming from the solenoid and the coil. The negitive battery lead was also very warm. I only cranked it for a very very short time and now there is nothing. No lights on ignition nothing.

    I inspected the wires and checked all the fuses i could find. The live wire on the solenoid was toast!! So having tried to nip the scorched end off and reconnect. There is still no power at all getting through.

    I know i will need a new live wire but i need help on the main problem.

    Some-one mentioned there may be a fuseable link somewhere but i'm unable to find it.

    Is there any other fuses anywhere that could be blown?

    Very depressed

    DC

  10. Cheers Fridge.

    To be honest i'm kacking myself everytime i turn the Stud/bolt.

    I've put a good few washers on it to make it just slightly (very) longer than the original UNC's that are in. Give us a loan of your magic wand and i'll post it back to you ;)

×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy