Jump to content

DC_

Long Term Forum Financial Supporter
  • Posts

    1,155
  • Joined

  • Last visited

  • Days Won

    10

Everything posted by DC_

  1. Most of the morning spent pondering what the best route to take was.... in the end all the bad ish stuff cut out and also the really bad. IMG_4646.MP4
  2. Thanks lightning, wasn’t able to see just how bad it was until I got the wing off. Offside wing I took off with the galvi inner wing still attached, but the nearside I separated them which was easier. I hope it does last a while after all this 😊👍
  3. Sorry to keep replying, I’ve just went into that link and they are now saying they are £255 wow!! It says in my history £98.... 😳😳
  4. https://www.ebay.co.uk/itm/291493695980 Turns out it’s nearly 3 years ago checking my purchase history 👍
  5. I bought bearmach for my 110 about 2 years ago and they still look good and don’t have any issues (I’ve went and said it haven’t I) I think they were about £100 ish.
  6. Also been blessed with the weather to get on with it. Cuppa in hand, breaky about to go on and then get stuck in. 😎👍
  7. Aye it’s a job alright Reb78 !! I’m actually enjoying it. Learning lots and now not so scared of things like this than I used to be 😱 if your chassis is in good nick maybe get on with the Bulkhead swap? But I’d say make a start and the rest will follow 😊👍
  8. Near side up to today.... what ever day this is?? 😂👍
  9. Hope you are all doing ok and keeping safe in these weird times! So as I’m self employed I’m currently doing hee haw work and still waiting on a help from the Gov 🙄 Anyhoo, I thought I might as well try my hand at repairing the 1987 110. The worst bits are the dreaded footwells and some bulkhead bits too. i know others could have done a better job but I’m kinda chuffed how the offside went. I’m currently onto the near side. Few pics for you to get your fix 😎
  10. Live wire feed to ignition switch on the wrong terminal? Ignition switch faulty? I’ve recently replaced my ignition switch as I had problems and this happened to me on a couple of occasions, mind you, the side lights thing is weird.
  11. @steve b thanks ! Can relax (a bit) when on trips now. 😎
  12. https://rimmerbros.com/Item--i-PRC2734P1 This did the job Mo and 30 amp relays were really just to renew the old ones.
  13. Winner Winner Chicken Dinner !! New ignition switch arrived, fitted it this afternoon. Everything all cleaned up. Boom result! Actually a good bit of difference in the starting up. Does seem a lot stronger now. A nice end to the problem. 3 new relays and an ignition “Lucas” switch = £38 Used the same barrel in the new switch so same key and all is good. 😎
  14. It states it for the Aussie Perentie but also the series models. Hmmmm. Might just try it.
  15. Hmmmm would this fit the switch I ordered from RB ? 🤔 https://www.lrparts.net/536913-land-rover-series-3-ignition-barrel-and-key-for-diesel-1968-1971.html
  16. Found this which puts me at ease more although I’ve not got the nice barrel with wings....
  17. Ok here’s hoping. Or maybe mine has the barrel (like in the doors) and it will slot into the new switch. 🙏🏻
  18. This is ALL I have..... Notice the key is in here. So the one I ordered is like this. I don’t have anything else. This attaches to a bracket that’s on the steering shaft.
  19. Thanks Ralph, good time there 😎 I’ve just thought of something else guys. I only have that ignition switch that in my pictures and my key goes directly into it to start it. I don’t have a locking barrel. I’ve ordered this from rimmerbros https://rimmerbros.com/Item--i-PRC2734P1 Would this come with a key too? 🤔
  20. @steve200TDi yes I’ll make sure all are well cleaned and re crimp 😊👍
  21. @FridgeFreezer thanks for that info! Great help. I’ll leave the white wire off as you say, it might be just for something that’s not on mine 😎👍
  22. I think it’s the ignition barrel for sure. Took the glow plug wire off and did the push pull test on the actual terminal, it did exactly the same thing. Going to order a new barrel......... @western Ok Ralph the clock is ticking for a part number 😂😂 lol.
  23. Cleaned up the live feed wire. So this is what’s happening, hopefully you can hear the relay clicking on and off. When I push in ignition lights on and it would start ok. Let go or pull out slightly I lose everything. ignition switch ? The connections do seem tight enough. IMG_4395.MOV
  24. Another thing found, this white connection wire was off and there’s a space for it. Should it be connected? What is it for? I dislike electrics a lot !!
×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy