Jump to content

Ian M

Settled In
  • Posts

    231
  • Joined

  • Last visited

Everything posted by Ian M

  1. as dan says, you normally need to tow in gear to build the oil pressure / lifters etc up quicker
  2. it sounds like you didnt have the rod located in the slave, and have popped the slave out into the bell housing, depends if you can get all the bits back out of the bellhousing
  3. sounds like you have pushed the slave out, was it lined up with the rod in the gearbox ok when you fitted it?
  4. Sound like the clutch master cylinder. best replacing it before it gets and worse and fails completly.
  5. Not long to go now, whos ready, who's not? Whats the entry list looking like Neil?
  6. you'd be better off not turning up james!
  7. http://www.awdc.co.uk/index.php?option=com_content&view=article&id=110:2009-challenge-regulations&catid=37:challenge&Itemid=65 2nd download down.
  8. all 4 count when i checked in the regs earlier after our conversation james!
  9. We had a fantastic day , the truck ran really well! This round was more like a winch challenge with lots of winching, lots of big pulls, some very good techincal sections. special stage was also very good. we were expecting top 3 but not 1st! so we are well chuffed, roll on Slindon, will be an exciting end to the season, from our calculations on the way home we thought that put us 2nd overall aswell on the day. not to much damage, just a cracked windscreen, snapped waffle and a snapped rope. something didnt seem right tho, someone was definetly missing. we didnt stop mark on the a5 as we guessed as we were almost last to leave everyone else would of stopped to check you were ok and saw mr tunnah was with you. Ian
  10. not the covers the but platic cap that goes on the end of the lever/handle?
  11. Does anyone know the part number for the Black Plastic Caps, that go on the lever that adjusts the seat back?
  12. does anyone know the part number for the bulbs for the td5 speedo head?
  13. Some more pics: +3inch drum kit std drum kit solenoid control kit manual control kit both drums prototype drum test set up
  14. We now has some drums in stock! Please give us a call on 07786699856 to discuss/order. Our website is currently undergoing a full re-vamp so the drums wont appear on the website until the new site is launched. ive been testing a prototype drum all year and its been faultless. These are definetly the way to go! Regards Ian West Mids 4x4
  15. not too bad result for us, 6th in class 2, 7th overall, seens as we lost an hour and a half, with a dodgy cooling fan, which in turn blew the top hose off, then a rock burst the radiator, and we struggled to bleed it properly until we could get on the level, then we picked up a puncture after that, and also lost alot of time stuck behind people on stages! so overall not too bad a result! James/Nick you couldnt of got much closer to us than this! i had the prime seat, wish we had an on board camera! I also had prime seat view of kevs/dans roll in the gulley! Truck is washed and ready to strip down for maintainance, not too much damage, 1 inner tube, rad will live another day, and a slightly bent gutter bar on the cage! some sections were very confusing with the tape! i think the numered gates will help, but some very good sections, i very much enjoyed section 5/6! cya all at corwen!
  16. On the last event of the howlin wolf the scruitineers picked me up on my harness, saying id need to change it! what are the actual requirements? Ian
  17. you will want to get it changed asap as it drips onto the starter motor and i have seen it many times knacker the starter motor
  18. the belts are different lengths to suit the 2 sizes of alternator pulleys! might be worth making sure you are using the right one.
  19. Hi Nick No problem, just down the road from me and will be at round 2! Ian
×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy