surf110

All the items you mentioned are new except the radiator. Haven't had time to test the radiator yet but I suspect that the problem lies there.

Bought a wrecked one and brought in as parts to use on my NAS 110.

Will try that. Thanks.

I live in the US and have a 2000 Td5 110 CSW with Allisport re-chip, Allisport intercooler, EGR bypass and turbo boost box and stock radiator. Engine has 75,000 on it. Was going up a steep grade at about 70 miles in 95 F degree weather and noticed the needle almost to red. Eased off the pedal and temp went back to normal. I could control the needle by easing off the throttle and slowing to 55 mph. Replaced thermostat, viscous fan, expansion tank, all hoses and flushed the system. Did another test today in the same weather conditions and the problem persists exactly the same. This time I used a Nanocom to monitor the temperature. In 95 F degree weather in city traffic, coolant temp stays between 92 C and 98 C. On the freeway going up the steep grade I hit 117 C and the needle was almost to red. Stopped and checked under the bonnet and coolant wasn't boiling. Had a slight smell of coolant in the engine bay. Noticed that the temp gauge will stay below the half mark from 80 C to 115C. After 115C it goes up rapidly. Am I risking damage above 115C? I probably hit 118 C or 119 C the first time around. Do you guys think I caused any damage? What's the highest it can go without causing problems. I'm not loosing coolant and my hoses are all soft. Don't think it is head gasket. Any suggestions? By the way, 110 wasn't loaded and I wasn't towing. Any help would be greatly appreciated.

My new (to me) D 110 CSW puts out black smoke with every gear chage. Is this normal. Its a MY 2000, Allisport chip and intercooler.

The unit has arrived. Everything looks good but I'm missing the breather tube and expansion tank. Missing also gasket between gear and overdrive body. Where can I source these?

Thank you. You have PM.

Just bought this one. Do you guys have a manual that can be email to me or posted here?

Thanks guys. Just wanted to make sure because the one that Devon 4x4 sold had a different part number which was 119520/00/KT.

Hey guys. Is this the right overdrive for a Td5? Part# DA4066

Can you change the sender calibration? I can get a WFX000260 for cheap but my 2000 Hi Cap 110 calls for WQB100420.

Yes. And the others I've driven have a lot more punch.

My 110 is a new build from a NAS 110 and and Td5 hi-cap engine with 75,00 miles. Don't know how it was before but everything was checked and triple checked. Anything that was working properly, was replaced. I think diesel is similar to UK. I'm running it at sea level.

I have a brand new MAF sensor in there.

My 2000 D110 is gutless off the blocks and I need to rev it to 2000 rpm to get it going. The thing has an Allisport intercooler, Allisport re-chip, Td5 Alive EGR bypass, turbo booster box, Td5 Alive exhaust and it seems to have less power than a stock Td5. Everything seems to work fine and I have no fault codes. Is there any adjustments that need to be done. By thew: I'm in the US so any help is a big help. It is a MY 2000 engine. Thanks.

Sorry 110 Hi-cap.

I have a 2000 MY Defender. Fuel pump part# number is WQB100420. Can I replace it with a later model fuel pump part#WFX000260?

Just wondering if any of you have used this RAI with an external roll cage.

Ian, Can you supply the exhaust you mention above? I already have the pre 02 down pipe. Just need the rest. I'm in the US, so it would have to be shipped here.

What do you guys recommend for Td5 performance exhaust? Is the Td5 Alive Exhaust any good? Thank you in advance.

Got it. Thanks.

Hello fellas? Where is the engine number located on a 2000 Defender Td5 engine? Someone told me under the exhaust manifold, slightly more towards the front of the engine. Just want to confirm before I start looking for it. Did a search and nothing came up.

I have one but it is not to scale. I tried to upload it but it's nt letting me upload an .ai file. I'll just email. Hope it helps. Ze