Jump to content

Wytze

Settled In
 View Profile  See their activity

  • Posts

    1,097

  • Joined

  • Last visited

  • Days Won

    3

 Content Type 

Everything posted by Wytze

  1. Wytze
    Ooh, wow.. !! Very cool, that is getting a very nice spot on Olga😁
  2. Wytze
    If you can , mock it up under the 110, set what ever angle you feel comfortable with? 27 kg?
  3. Wytze
    For mine i bought one of these. It does bypass and heater matrix. Work's really well
  4. Wytze
    Not bad , no😁 Food and mig welder feed motors🥳
  5. Wytze
    Is the wire sticking? Sometimes it help's to blow through the transport cable with compressed air.. Often there is dust in there after standing a while
  6. Wytze
    A bit more work then😬 Nice to see it get build and mounted. Ooh, and how the vevor will cope
  7. Wytze
    No harm in going your way. Mine is spring over axle. About 8 inches long spring seat's with RM parabollics. A pretty heavy Mazda 35 slt with a ZF 4hp22. And that sit's flat. Used a extra parabolic leaf, but that got way to stiff. It did corner like a racecar though😁. Keep us posted.. Oh, and a few pic's would be nice, or a build topic? 😁
  8. Wytze
    Do you mean the bolts for the rocker assembley? Then i would say, yes, with a but. Do a valve clearance check, aswell
  9. Wytze
    Just have a look... it's better to know then to fear😁
  10. Wytze
    They will not accept the extra weight. One extra parabolic leaf, will make the front very hard. If you're not going to use it off road , that would be fine.. Otherwise it will be to stiff. I'm going to try a trailer spring , that is rated for 1000 kg as a set.. Using one , cutting it up , one leaf on each side.
  11. Wytze
    I can believe that, on my mind it's welding that would like a small gap.. I ones took a big old closet upstairs , after that i changed the layout off the hall....The closet would not come not down that way again😁 If you can build it all inside it's good... The door looks a little narrow, that's why😃
  12. Wytze
    Would pick a light trim over a huge gap. Is the door wide enough to get all your material in?
  13. Wytze
    Stainless does use a bit of power. The smaller the stuff you need, the more time they need, because of heat build up. You will pay for the extra time
  14. Wytze
    Good nesting bring's good profit. The press brake work can be a bit of a pain if the roller direction is all over the place in the cut pieces
  15. Wytze
    Size does matter, yes😁😁😁
  16. Wytze
    That few extra inches do work really well
  17. Wytze
    Stop that... And paint your portch😁
  18. Wytze
    I think that is just about what would you like..? One lump or two.. kind of thing? My bumper is all 5 mm, but it's heavy.. With a bit more thought, saving weight and still keep it strong is not bad.
  19. Wytze
    Thank you Nige.. Ashcroft it is, then😁
  20. Wytze
    In a mild steel quality😅
  21. Wytze
    Thank's Daan... I must say, it doesn't help that mine is on 35's Just bought these, because they would fit on both axle's. Would just buy the Real Kam one's, if they are the real one's . Order 5 of them, And i would allway's get home, that way. The Terra Firma one's do wear out fast.
  22. Wytze
    That's not even doing very stupid stuff. You must have said.... well.. darn😬
  23. Wytze
    That's not good😅😅
  24. Wytze
    Recent stuff? If you don't mind me asking?
  25. Wytze
    That is what i thought aswell🤓
×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy

  I accept