Jump to content

player

Settled In
  • Posts

    24
  • Joined

  • Last visited

Reputation

0 Neutral

Profile Information

  • Location
    GREECE

Recent Profile Visitors

200 profile views
  1. I think i must try to connect it, i don't think anything be damaged. What you say???
  2. Hi, i don't know anything of the specs of the 14cux transduser.. sorry, but it looks like this one. https://www.google.com/search?q=AMR3386&rls=com.microsoft:el:%7Breferrer:source%3F%7D&rlz=1I7SKPB_el&source=lnms&tbm=isch&sa=X&ei=3KxfUs3zH4vGtAae7ICACw&ved=0CAkQ_AUoAQ&biw=1280&bih=671#facrc=_&imgdii=_&imgrc=OYCD6W9f3PUIwM%3A%3Bgp3OZwXIp5zvrM%3Bhttp%253A%252F%252Fwww.bputah.com%252FParts%252FLand_Range_Rover_Discovery_Defender_Speed_Sensor_AMR3386.jpg%3Bhttp%253A%252F%252Fwww.bputah.com%252FParts%252FLand_Range_Rover_Discovery_Defender_Vehicle_Speed_Sensor.html%3B504%3B448
  3. Hi, Iam interesting to do the same modification, has anybody connect the td5 speedo with Lukas speed transduser? Thank's
  4. 2013-08-07_02.39.01.msq i can't send msl files i don't know why...
  5. I change the setting to the speed desity and the engine is running very well, is not running rich any more. I try the live tuning, ithink it works. I still have the problem with the fire up on cranking, is very hard to fire up... Until i was driving the car was died i think without any reason and then was not firing up. After of a while it was fired up and run without any problem. I send datalogs and msq please your opinions
  6. By the way.. One of my biggest problem is the firing up, of the engine. When i try to fire up it takes two or three minutes with result the battery will be always dead.... Until the engine as finally tuned i have to turn on and off the car several times and this symptom is very tiring for me and for the engine too. What i have to check to resolve this problem? thank's
  7. Hi i don't know how to build a target AFR map. To be honest i don't know what target AFR means exactly!
  8. Hi my lambda is a techedge linear with it's own cotroller. the sensor that use is bosch. here is the link http://wbo2.com/2c0/default.htm Thank's Chris
  9. The lambda is completle new. the engine was runing well with 14cux. the required fuel what value it sould be? 16.8 value seems corect to you? for a standar 3.9 rover v8 thank's
  10. Hi to all. I had a little progress yestarday. the stepper is working now. I adjust the idle as the best i was can, now the motor is idling good enough and is drivable I drive it out for the first tunning... I drive about an hour in the city and highway and try to correct with tunerstudio live tunning, after tunning i think was a little better, but the car is still running very very rich. When i accelarate and looking back from the miror a can see black smoke. Now i think it must tune the engine as much good i can and after finished the adjustments for startup and idle. Because, i can't understand the tables, please if somebody is pleased, i really need some help I post my last MSQ and please if you have any adjustents to advice me please do... thank's chris lasttuning.msq
  11. Hi, my stepper motor was working before for sure, also i have two of them and i have tried the both, the only effect i can tell is when i connect for the first time is working for i time and after of that stops. The wiring is checked wire by wire by the diagram sended of the supplier and seems to be fine. I try the stepper with the "idle valve test" function of tunerstudio but nothing really happends.. thank's
  12. Now lets give you a view of the car.... I use a MSII controller with version 3.2.1 a 36-1 trigger wheel two coils on plug my old stepper motor a new wideband lambda with its controller I have buy the full version of tunerstudio I have complete all thew wirings and fit everything in the car. I did the basic settings(i think all of them) Adjust the timming with a timming light The car is fired up!!! It works!!! But it has some issues... now i really want your help 1) My supplier advice me to use resistive spark plugs i use NGK BPR6ES and i have a set of BOSH PLATINUM PLUS code WR9DP is that good enough? 2) The stepper motor is not running, the wires is right i checked. At the settings i have chosen "stepper moving" at idle settings 3) the motor is idling very high around 1400rpm's (i don't know how to get it lower) 4) the car is running very rich but i don't have deal with tunning yet... 5) the car is cranking for a while seconds until it fires up (maybe 10) Thank's Chris
×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy