Jump to content

Sharpe

Settled In
  • Posts

    34
  • Joined

  • Last visited

Reputation

1 Neutral
  1. If its the pipe I thinking of, haynes says 25nm.
  2. Yep - got mine taped where needed, I never noticed a drain - best check I have got them on the right way!!!
  3. My two pence worth is simple....a Landy is a hobby, if you dont want a vehicle to also be a hobby in your spare time - go for a van. I get as much enjoyment reading several forums as tinkering with the actual car.....I spend a large amount of time reading, tinkering, changing, fixing, servicing, and I dont do many miles. If you could see yourself going to a landy show for the day and thinking its the best day of the year then a landy is for you. If you want to "just add fuel" its not the vehicle for you (not in that price range unless your really lucky and hold out until you find a perfect one). As I said, my two pence worth - not worth much!!
  4. Disconnect neg on battery, clean all connections both sides with wire brush, bit of sanding, till nice and shiney, both connector and area connected too.
  5. Should be one earth from battery to gearbox casing, engine strap (on mine from rhs of engine, looking from front, half way down to chassis bracket) and one side of fuel filter on bulkhead - under drivers window in engine bay - black wire attached). HTH.
  6. Quick update on this - I noticed the viscous fan clutch was dead, so ordered a new one for £30, so as i had already paid delivery costs I ordered a Bearmach temp sensor PRC2505 to replace the previously ordered Britpart PRC2505, just in case. Guess what - engine temp is perfect now. Cheers
  7. Got the same problem on mine, will be interesting to know if you find out what it is. Mine disappears only when I put the clutch in.
  8. Thanks Snagger - just checking.
  9. Morning Chaps Just faffing with the old girl seeing what else needs doing for MOT, can anyone let me know the following: - Shes been on tick over for about 15 mins, top hose has got hot close to the engine, so thermo is opening (just put a new one in) but the rad end is still cold and rad is cold, takes at least 20-30 mins before rad starts to heat up starting from top hose corner to bottom hose corner (around further 10 mins until full rad is hot). Is this right or is water pump running slow? Cheers 19J 2.5TD Al
  10. One seller states - Will Only Fit 2003 Vehcles Onwards - Can Fit Earlier with Mods to One Bracket Near Fuel Tank
  11. I would say not - sellers dont usually reduce their target buyers unless they have too! Ive just had a look at a few and they all say 2003 onwards. Stick with rock and tree sliders - or get imaginative with fittings if you really want them.
  12. They look smart and a decent enough price. The tinted would look good on mine - my wife aint going to like you for putting extra "bits" I now want!
  13. Thanks Western - I dont have access - however, I came to start the Landy this am and got ignition lights and then a spark from battery on attempted turnover then dead. Took neg terminal off repeated x 2 same thing. I have taken the dash off again and completely removed the bulb wire, it was either this or I disturbed something. When put back together truck started........Im just going to live with the high temp reading until I can afford an auto elecy trip after MOT. Im just going to end up making things worse I think!! Thanks anyway. Al,
  14. Evening I have removed the earth from the broken light and also tried another temp sender. It no jumps all the way up immediatly then falls down and up and all over the place then settles and reads high. Anyone have any suggestions of where to head next? Many thanks
  15. Hope the daughter is recovering - I know the feeling (ish) my 12 year old has severe asthma and when she has an attack my world ends!!! Congrats on the 110, Im just putting the finishing bits to my 1989 90 CSW. Its a good feeling when you get a 12 month ticket!!!
×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy