Lamby

I would love to know or see how these are supposed to work!.Can't fit my sunglasses in there which is what the handbook says its for!.I just use mine fot stashing things like keys and that in and they dont seem to fall out.

went to Billing for 2 days!..Thoughley enjoyed it!..Lots second hand goodies to root about it and lots of shiney stuff to be brought.The lads at devon had lots of time to chat and they wasnt being pushey and trying to sell!However wouldnt waste another second at Nene overland!.Was enquiring about 2 defender i really liked and might of even ended up buying one of them.They were rude,arrogant and good at making assuptions!.Got told that oe truck was out of my price range! CHARMING!

As the above post says "pre tuned" is aload of cods wallop.Unless you buy a nice sirio then they are nearly bang on. During the tme you havn't used it have you had a twig on or not?.If you havn't water could have got in the mount and corroded the inside. If your using a body mount i would clean it up and run a wire from the underneath of the mount to a good earthing spot then try.If your using a gutter mount try scraping the paint off where the screws hold it down and if your using a mag mount check the connections inside because theya re notorious from corroding.If still no luck with any of that jazz inspect your ariel cable or renew.If still no luck have a gander on a cb fourum.

Now that is something to be proud of!..Nice work!..Awsome mpg too.

sounds pretty good to me!..I would be pleased with that.I run 265 mud terrains and get about 25-30.With a IRB developments chip.Before the chip was getting 24-26.Country driving going no faster than 45,main roads not going over 65....but having said that now i have the stage 2+1,full width intercooler,egr bypass,de-cat etc etc ive given up with fuel consumption.I just enjoy drivng it and put fuel in it when it needs it!

If you look at the interior light there should be a little groove on the side.Push a flatblade screwdriver in the slot and twist.This should relese the plastic cover/lense.Once the cover is offf there should be 2 Torx head screws holding the light onto the headlining,undo these and pull the light away from the headlining.There should be a wire plugged into the light section,unplug this and move it out of the way.Now you need to get a ratchet,extenstion bar and a 8 or 10mm socket(i think).Where the light came out there is like a double skinned roof. there should be a hole giving access to the radio aieral base,inside there you should find the nut that holds the aieral wire and mount to the roof.Use your ratchet to find and undo the nut(be carefull not to loose it.Once un-done you should be able to get you hand in there ti take the cable of the mount.Once thats done pull the mount out of the roof.(there is 2 mounting points,1 metal stud and 1 rubber thing to stop it twisting i think).Put your new one in and put it all back together. Took me about 20mins once i found out how to do it. The Mount cost me £8.94 from LR and the whip cost the same. Mine is a 3 door but i think it is pretty much the same setup on a 5-door model. Hope this helps

Oxford blue is the darkest i think.Not 100% tho

sorry just re read your post!.This wont be very helpfull for a 1 hole either side. My mistake

Go to your local holfords or radio shop a they should sell a "universial radio removal tool". Its a u shape piece of metal just the same as in the photo. I got one from halfords and it got my genuine lr cd player out.

I had a brunel silver one on my old 90 TD5 (Monte carlo blue).Looked really smart but i think it restrivted the airflow slightly.

Defender 56, I had a look at my load cover today and there is no makes name on it.I will ask the chap i brought it off if he knows where it came from.

Hi all, I wonder if you could help, im after a ARB winch/bumper/bullbar for a defender,Failing that maybe a TJM Bumper/bullbar.Or if there isnt any luck with them to a mint condition genuine land rover wrap around bullbar, If any one knows where i could get one from or hs a secondhand one it would be a great help. Cheers

Hi,I have one of these for my 110 pickup (not double cab) that fits over the spare wheel and load area and is held on by elastic which you attach to the lashing hooks.I will have a look tommorw and see if there is a makers name on it for you as they might make one

I hafd this probelm on my old freelander...Just brought the new switch which black ibex says and all was fine.

Hi all, I am looking for a set 4 or 5 freelander sport alloys if you have or know where some might be.I'm not sure how to posyt pictures but for those of you who unsure this is what they look like. http://www.simmonites.com/vehi/freelander03iso.jpg Cheers