Jump to content

yellowmitch

Settled In
  • Posts

    58
  • Joined

  • Last visited

Reputation

0 Neutral

Contact Methods

  • Website URL
    http://www.yellowmitch.com
  • ICQ
    0
  1. Hi there TSD, If you have the webasto instructions handy, would you mind mailing them to yellowmitch@gmail.com Thanks Alan
  2. any more suggestions. All help much appreciated thanks
  3. it has been fully lined with heavy duty closed cell camping mats and has a lasalle headliner so it aint that
  4. Hello everybody, my lift up handle type sunroof on my defender 90 leaks. (no news there then) I have sealed all around the inside and outside of the frame with black sikaflex, replace the seal for a genuin land rovr one, tightened the scres on the hinges, put draught excluder foam on the glass to get rid of the bulgy gap effect in the centre of the glass, and still after a damp or frosty nite, it leaks in acroos the front part of the sunroof. When I hose it, it does not seem too bad, but yet the hinge area keeps dripping on my and the passengers lapa and this morning the inside of the front edge of the rubber was frozen up!!! I have vaselined the seal too, but this was also no good. I would like to able to use the sunroof but it looks increaisingly unlikely. Whats my best option? can I change it for a twisty handle one? Whats the suggestions here
  5. Excellent Job! I am waiting for my VDO vision rev counter to arrive and have to make my low fuel warning mod and then I should be all done also! If I just had the front end of my car finished now I could test drive it! See my project at http://www.landroveraddict.com/smf/index.php?topic=381838.0
  6. Glow plug and brake fail are already wired in. Just not shown on the pic. My car does not have the low fuel warning I have also now fitted the water temp sender !!!
  7. Hi everybody and thanks for all the help with doing htis Mod. I now have successfully completed it, using Retroanaconda's guide which I must say was superb!!! Thanks everyone for the help, especially Retroanaconda. I have not tried the new water temp sender yet, nor have I driven the car to check the speedo, but everything else works perfect as can be seen below. Thanks again Pic
  8. sorry if i replied in wrong place Will start new topic for future build updates. Alan
  9. P.s. I love the fact that I painted it yellow
  10. Slightly off topic, but to give you guys an idea of what I am doing, here is my dash so far. First pics are about 7pm last night. Last pics are around midnight. I am adding heated seats, cibie h4 spots, heated front screen, work lights, cb, stereo...... The list goes on
  11. Thanks again. I am in Londonderry Northern Ireland (not many defender buffs here !!) I will post some pictures of my scary looking dash later if I can work out how
  12. Ok. Thanks everyone for all that. As for what wire colours are not the same, do I just refer to the diagrams or how best to know? I am still a bit baffled (I am a stupid head sometimes) Basically, I think that I swop warning panel plug wires like for like I add a VDO rev counter and use a timing light to work out the revs I get a td5 clocks loom and transducer out of a scrapper I modify Td5 dash loom by a couple of pins to suit my Tdi I buy a different water temp sender Is this all correct? I am silly enough to need it spelled out in a step by step manner. Thanks for all the patience Alan
  13. Ok and thnaks. This is all making loads of sense so far so thats good!! Now I suppose I need a similar plug wiring diagram for the old white instrument cluster plugs to help me understand what wire to swop to the other new plug (that make sense?) Finally, what wires are in the big grey loom plug and what do I connect those to? Alan
×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy