drove it without the front prop on and it still made the same noises
so took a chance and slung in another transfer box , and guess what still the same which only leaves the gearbox i guess.
losing the will to live with it now!
is a disco and defender r380 gearbox the same or interchangeable?
hi guys
the transfer box oil was like choclate so changed it and noise is still evident.
it happens around 35mph, in certainley 3,4,5th gears. the noise varies on throttle application so gets noiser for example if accelerating in 4th at 40mph rather than 3rd if that makes sense.
the other week my transmission started whine and its getting progressively worse
I noticed the rear diff pinion had masses of play in it so sorted that, new ujs on the rear prop.
the noise happens around 30mph and gets louder the more throttle is applied, it sounds like its coming from the tunnel area.
is it more likley to be the gearbox than the transfer box?
or how can i tell which it is thats the offending bit ?
many thanks for your help guys
Hi put nanocom on and the fault reads
18-03 ecu ground or reference ground fault intermittent 255 times
So sounds like a earth fault? If so where is the earth for the ecu?
I'm also mindful that the abs tc system was switched off so this could be the ground issue so I have now cleared the faults and will test drive it to see if any faults appear afterwards
Hi will have to find the codes, I wrote them down somewhere.
I took off the nsr hub this am and aside from a little rust scale floating around in the hub where the abs sensor is all looked ok.
Hi there
On a 2002 td5 90 with abs and t c and the lights are staying on. Got the lights off via nanocom ok then when driving it whenever it hits a bump the brake comes on on the nsr!
Any ideas what the fault could be ?
Thanks
does any one know how to set the brake up into the drum of a warn 9.5ti - im guessing it will be the same principle as their other mainstream in drum braked winches.
I just cant to get it set right , so it keeps slipping?
many thanks
hi m8
I made these for a Disco - they are bent to match the bodyline. Making some for a 90 should be easier
for more pics......
http://s206.photobucket.com/albums/bb101/northants4x4/parts%20Mods%20and%20fabrication/?start=40
how do you get a bowmotor to fit a warn 9.5ti?
As the motor splines are different, is it that you can change the drive motor coupler for say a 9.5XP one for example?
can anyone advise?
thanks