muddychris300tdi
-
Posts
391 -
Joined
-
Last visited
-
Days Won
4
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by muddychris300tdi
-
-
Morning all.
I need to replace my front discs. Currently fitted are vented drilled and grooved of some make. I want to replace with drilled and grooved but, I can get a pair from Paddocks for around £60 or a pair of ebc for £158. So my question is there a difference in quality in discs and will be better to spend the extra £100 or not.
Thanks Chris.
-
That's going to look, erm purposeful. Good luck with what ever future.
-
LR4x4 rolling road day.
- 1
-
Turners website estimates an increase of 10-30% in power. I've always wanted to put mine on the rolling road to see if all those little mods at up to anything.
-
I have one on my 300tdi. I fitted it along with full size intercooler so carn't say how much difference it made on its own but it does go ok. I've never had chance to put it along side a standard 300tdi to see if there is much difference between them.
-
Yep, that makes sense. Thanks.
-
Bringing this thread up again. Could it be an option to use a P38 manual gearbox. Obviously adapting the seat box for different stick position.
-
-
Have you sorted it?
-
I've got a nice set of blunt drill bits you can borrow.
- 1
-
There are plenty of other seats out there from other motors that you could get to fit at a nice price.
-
You now want it bringing from stoke to Derby? I'm doing Derby to uttoxeter and back a couple of times a week if that helps. And going to billing tomorrow from Derby.
-
I like the mountains, I think they would like good on a mug but don't think they would be right on a t-shirt unless it was larger on the the back. So maybe if possible LR4x4 on breasticle and then the full 10th anniversary logo on the back.
-
Reviving an old thread, just wondered how the u-pol raptor is looking now it's been on a few years?
Chris.
-
I have fitted blinds similar to your link in my passat estate. From a driver's view there fine, they make it a little darker in the car but for a rear passanger there not good to look through as you have to focus through them where as tinted glass is just like a wearing a pair of Sun glasses. They don't really seem to keep the car cooler, they just keep the bright Sun of my kids.
I tinted my middle Windows in my Disco and its not hard if you take your time. I plan to do my 130 myself.
-
Ahhh flash band, got loads of the stuff.
-
Hi all,
I'm currently having some welding and bits done to my 130. One of the really bad sections that were badly corroded where the two cross members behind the body.
the bit on the body has some Ali corrosion what's new. So on putting the new cross member back on the body what shall I coat them in to keep the Ali away from the steel.
Thanks Chris.
-
I like the idea of a sensor/alarm but what if next doors cat decided to have a wonder around under my motor?
Chris
-
There are quite a few patrols on you tube with bmw engines fitted. What torque do you think you are running, must be near limits of the gearbox. This now is another engine option for my 130. What would be the easiest option for engine mounts?
-
Very nice, could do with a workshop/shed/dumbing ground like that myself.
-
As above, spray it on. For wipe down ability I would use acrylic eggshell.
- 1
-
Could it not be that your shocks are to long and are bottoming out
-
I think this will be a perfect engine for my 130. I just need someone to fit it for me. Dan, I think I we need a chat.
-
Brake disc quality.
in International Forum
Posted
Sorry should have put that I want to put vented drilled and grooved back on.