Jump to content

Tim_NZ

Settled In
  • Content Count

    54
  • Joined

  • Last visited

Community Reputation

5 Neutral

About Tim_NZ

  • Rank
    Member

Profile Information

  • Location
    Australia

Recent Profile Visitors

823 profile views
  1. I fitted one of the Ashcrofts HR kits to my SIII 88" and don't really like it. If I were to do it again I would probably fit a roamerdrive overdrive instead. Just my 2c.... Cheers, Tim
  2. M20 as fridge said, pitch is 1.5 You really need the unshouldered type, (the allen key type), as the casting doesn't have a flat shoulder to seal against. Cheers,
  3. I'll just be happy if there is an option to have 3 pedals and a wobbly stick. It's very difficult to get any 4WD here that is not an auto now. Cheers,
  4. Pretty good comparison of different methods in this video also: Cheers,
  5. Thanks Snagger, the car is CKD ex New Zealand, so the sidelights/indicator arrangement could be due to which ones they picked up first, or even the wind direction on the day.... They were always that way around so I put them back that way. Cheers,
  6. I'd love to drive it more Bowie! I have however managed 1,500km's in the last couple of months though. The first day I was driving it around it was 42degC, the mesh hood and sides was a god send! Cheers,
  7. Well, hopefully I can stop spending bloody money on it now! All done, and back on the road.... Cheers,
  8. Apologies for the off site link, (mods please delete if not allowed)... xychix, there is a photo or two here: https://www.aulro.com/afvb/series-iii/240801-my-88-series-3-a.html Cheers, Tim
  9. If it makes you feel any better, FF, the steering wheel is a bit of a disaster (Apologies for the hijack) Cheers,
  10. I hate to think how many times I've been at "only a few thousand more and it'll be done" stage And it still looks like this :/ Cheers,
  11. Thanks FF, I'm doing a pretty serious restoration, pretty sure I am going to give the BP doors a miss, just looking into the SP Landrovers reproduction ones a the moment. Not too much of a worry about corrosion here in Western Australia, unless you like to live on, and in, the beach. Cheers, Tim
  12. Hi everyone, I need a pair of front doors for my 74 series 3 that I'm refurbing, most suppliers, (that will ship internationally), seem to only stock Britpart doors. So, are they any good? Or do you have another recommendation? Thanks in advance, Tim
  13. I'd imagine cork gasket material would cut quite easily if it gets through neoprene? It might be necessary to use some sort of vacuum table to hold the material flat though, (which has it's inherent risks with fire etc!). Cheers,
  14. Really interesting project, thanks for writing it up Is the laser strong enough for cutting gaskets? Cheers,
  15. I did a LR experience day in my TDCi Defender, the instructor mentioned the wading depth (500mm) of the TDCi is set by the electronic throttle pedal of all things, (not to mention the ABS and Alarm ECU's under the drivers seat). Cheers,
×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy