V8 90 JON

friend of mine had his fixed by a guy in Southampton complete job remove repair re fit was about 2k he's had it back on the road for six months and no problem

only just seen this Nige.... surprised you didn't just send me one! oh and yes it runs better now thanks doctor.. will try one out if your still looking for helpers

oil changed replaced the plugs(to get rid of the misfire) still a bit blue..any thoughts as to how long it should take to clear,obviously the exhaust will have a fair coating and will have to get hot enough to burn off whats in there but i think my neighbours are going to get the arse soon!!

ok so off to the shops in the morning then....would the wrong grade cause such a lot of smoke?

changed the oil on my 4.6 v8 today put 10/30 mineral in .....and oh s**t cant see down the road for the smoke....so have i done any damage is the oil the wrong grade and what should i do now?? (no rude answers involving diesel thank you!)

im in on saturday or if you come to the mud monsters event on sunday you can try it out!!

Hi Ruuman is my winch bitch he runs a milemarker with pto Im in Croydon and have a saley front and milemarker type r on the back chain driven pump via a dog clutch to a 30cc motor if you want to look no problem call me on 07860 894482 v890 jon

not quite like that has about 90mm of chassis left sticking out,

hi I have a very good second hand genuine cross member only removed for a tray back conversion £75 if your interestead

After coming into contact with a kin large oak tree going backwards at a fair old lick, both my engine mounts sheared,i have fitted then qt ones in your post, good quality and i cant see them falling to bits in a hurry!

Problem found (i hope) ring gap in bore 6mm!!!!! not the recommended 6thou all going back together with new rings and shells so fingers crossed

trying to remove old composite residue from head and block faces on a v8 any suggestions cos its stuck like s#it to a blanket