V8 90 JON

friend of mine had his fixed by a guy in Southampton complete job remove repair re fit was about 2k he's had it back on the road for six months and no problem

only just seen this Nige.... surprised you didn't just send me one! oh and yes it runs better now thanks doctor.. will try one out if your still looking for helpers

oil changed replaced the plugs(to get rid of the misfire) still a bit blue..any thoughts as to how long it should take to clear,obviously the exhaust will have a fair coating and will have to get hot enough to burn off whats in there but i think my neighbours are going to get the arse soon!!

ok so off to the shops in the morning then....would the wrong grade cause such a lot of smoke?

changed the oil on my 4.6 v8 today put 10/30 mineral in .....and oh s**t cant see down the road for the smoke....so have i done any damage is the oil the wrong grade and what should i do now?? (no rude answers involving diesel thank you!)

im in on saturday or if you come to the mud monsters event on sunday you can try it out!!

Hi Ruuman is my winch bitch he runs a milemarker with pto Im in Croydon and have a saley front and milemarker type r on the back chain driven pump via a dog clutch to a 30cc motor if you want to look no problem call me on 07860 894482 v890 jon

not quite like that has about 90mm of chassis left sticking out,

hi I have a very good second hand genuine cross member only removed for a tray back conversion £75 if your interestead

After coming into contact with a kin large oak tree going backwards at a fair old lick, both my engine mounts sheared,i have fitted then qt ones in your post, good quality and i cant see them falling to bits in a hurry!

Problem found (i hope) ring gap in bore 6mm!!!!! not the recommended 6thou all going back together with new rings and shells so fingers crossed

trying to remove old composite residue from head and block faces on a v8 any suggestions cos its stuck like s#it to a blanket

my v8 (4.6 block and heads 3.9 front cover & megasquirt) has suddenly started using lots of oil. it's not a road car mostly used for challenge events and pay and play. so....there is little or no crank case pressure (checked at the oil filler) but the plugs are oily and it smokes,bluey grey smoke so is it rings or valve guide oil seals? and if its the later can they be changed without removing the heads?...compressed air into the plug hole to keep the valves shut whilst changing the seal? thanks in advance ....

After a large input off horse power at the weekend i broke a few bits..thought i'd post some pic's for your entertainment... this is whats left of my front dan bar after an argument with a log! bit closer and the remains of the front prop shaft!! and the other end... oh well of to the shops

Hi after a recent tray back conversion courtesy of hfh i have a genuine rear cross member with about 150 mm chassis rails left on in good nic any interest?

i have a dixon bate tow bar recently removed from my 90, for sale any use to you? £60 +postage

on a recent 900 mile round trip to germany with my supercharged l322 towing 16' trailer, averaged 17mpg, trailer empty one way 900kg on return i was happy with that!!! last weekend 70 litres of petrol = 5 hrs maybe 15 miles all in low range on a punch hunt in my 4.6 90 not so happy with that!!

after a hurried replacement of a rear brake line that split this morning i'm also going to make it...the paint is still a bit soft here and there but my snorkel is finished.....now where's that big puddle????

I have recently picked up a 56 plate super charged l322, so far the experience is not to good,subwfoofer does not work but the sales man told me he has "sat in the boot with one of his younger mechanics cd's"and it does work...he also says that the logic 7 system means you might not hear the sub speaker!! we now have a thump on take up of drive which the dealer says they have no known issues with,however there are known problems with software and valve blocks giving these probs.. not good so far!!

just got home from picking landy up from nigel...big thank you exactly what i asked for and top quality work,hope the bits im doing will be half as good(mind you after iv'e twated a few trees itwont mater quite so much)!! will post some finished pic's in about 2015!!

my subs not woofing..is there anything to look for before i take it to someone... ive checked the fuses all seem ok.

hi has anyone got info on part nos for tow bar for 2006 model range rover vogue supercharged? the one with receiver bracket and removable bar. (and will the one from my 54 plate td6 vogue fit?) ta very much..

Hi i've had my 54 plate 05 model from nearly new (was a demo with 3k miles) its now done 44k only problems so far front diff failed at 30k covered by warranty low pressure pump 33k apart from these bits its a fantastic all rounder....its also for sale (i want a supercharged one) so if you want a look let me know.