daxter1987

here is the how to change your front brake pads on your Supercharged RR with Brembo brakes for anyone trying to tackle this job. I recently did it for a customer and wanted to share it with the forums. http://landroverhelp.blogspot.com/2015/07/how-to-change-your-front-brake-pads-on.html Any questions, comments or critics are welcome!

The title says it all, I fixed the window on a Range Rover Sport and took photos all the way for anybody who wants to tackle this job. Is not that hard if you take your time and read this procedure please comment to improve! http://landroverhelp.blogspot.com/2014/11/how-to-change-window-regulator-assembly.html

I wrote an article with HD pics on how to replace the fuel pump on your Land Rover LR2. Here is the link: http://landroverhelp.blogspot.com/2014/11/how-to-change-fuel-pump-on-your-land.html Enjoy!

So today I got in my shop a land rover with a transmission hard shift and he was willing to pay for the disagnosis. Since there are so many with this problem I decided to post my findings on my blog with pics of course and share it with the forums. Check out my link: Land Rover Help!: 6HP26 Transmission Codes: P0780, P0781, P0782, P0783, P0784 and P0829 Best of luck!

I wrote an article on how to change the front brake pads on the new range rover. It is a step by step procedure for anyone who wants to tackle the job. Here is the link: http://www.jaghelp.com/2013/09/how-to-change-front-brakes-on-range.html Feedback is appreciated!

I wrote an article on how to change the rear brake pads on the LR4 with pictures. I tried my best to take a picture at every step so those of you who never changed the brake pads before can give it a try. Please check it out and any suggestions for improving the article is greatly appretiated! Link: http://www.jaghelp.com/2013/08/how-to-change-rear-brake-pads-on-2012.html

So I decided to take apart an AC compressor out of a Land Rover. The compressor is a SANDEN compressor and it is a very common component to go bad. The OE compressor from land Rover is outrageouly expensive, over 1000 dollars for the complete bill. So I decided to take an old one apart I replaced, take some photos and figure out why they go bad. Here is a link to the pics: http://www.jaghelp.com/2013/08/variable-displacement-sanden-compressors.html