old leafer
-
Posts
95 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Everything posted by old leafer
-
strange one here we have a rangerover trayback running 101 axles front and rear and have been asked to convert it to discs any idea what parts fit regards mark
-
ok here goes am i right in thinking 300tdi props will fit on a 200tdi motor or do i have to change the falnges regards mark
-
how much is it not been in there since i was 17 making the things
-
thanx for the advice i will look in to it further
-
hi does any one no if the gap is open this year and if it is whats the dates cheers
-
my mate has a prob with his td5 the heater it only blows cold its an es with the climet control there is plenty of coolent in it and the temp when running is normal has any one come across this prob before
-
thanx for the info gents new axle it is then regards mark
-
yep for a 90 but i can collect hubs easy however i will be divorced if i put axle in her belover g wagon
-
i am sure southdown do one for roll cages hope this helps
-
hi gents i was wondering if disco discs brake hubs will bolt on to the end of my drum axle or am i swaping the whole axle over regards mark
-
make sure the belt is good and tight it can be worth liffting the wheels of the ground and dropping the steering arm then turn the wheels incase it is a prob in the hubs regards mark
-
ok now my head is fried i think i will just bolt another lt77 any one got one with serfix s please and not to far away
-
to be honist i dont no but i am sure somone on here will have done it if there is to much involved i will pick up a nother old 200 box but i do seem to be eating them lol
-
cheers i think the td5 gearbox is the same as the r380 but i dont no about the splines i realy dont want to go to the trouble of getting a plate made up as i need it on the road asap and dont want to splash out on the box untill i am sure i was going to use a td5 cluch kit anyway its wether my trasfer box will go on the the splines aswell
-
"Medium Range" toolkit?
old leafer replied to Andrew Cleland's topic in Defender Forum (1983 - 2016)
for the room they take up a spare wheel bearing would be a good one to add i keep one in my motor full time after learning the hard way on a sunday morning regards mark -
ok can i put a 200tdi bell housing on to a td5 gear box and will it work my gearbox at the moment is sceeming for mersy and i would like to upgrade it any ideas as i dont think the one i have now will last the week out
-
thanx gents i no i have a good deal then they will be forsale on here soon they came with a job lot
-
gents out of intrest what are a set of 5 wolf rims with michelin tyres worth the tyres are as new and the dimond pattern ones forgot the modle tho regards old leafer
-
thanx mate did they ever fit them in a rangrover tho
-
just a quick one well ok 2 what ratio diff is fitted f reg 90 diesel and have landrover ever fitted a limeted slip diff as standered to any car as ashcroft are a bit pricey at the mo regards mark
-
hi looking for a wireing diagram for a bearmach solinoid to a tmax 1200 winch any one able to help or a photo of one fitted
-
prob with temp and amp guage
old leafer replied to old leafer's topic in Defender Forum (1983 - 2016)
cheers i will have a look tomorrow temp sender prob had it by the sounds of that -
i have a f reg 90 with a 200tdi defender lump fitted any one got an idea how to make the dials work regards mark
-
Abingdon 4x4 festival 2009!
old leafer replied to landroversforever's topic in Getting out and about
hi nick i would like to take this chance to thank the organisers for a good show the course was a laff as ever and it is great to hear the fundrasing went well would also like to thank the lads on the see saw for the use of the angle grinder with out witch one of our landys would not have made it home allready looking forward to next year regards mark -
yep true bath is on will be there aswell