Trodden
Might have a centre seat gong spare if you want it. Took it out to fit a cubby box. I'll check tomorrow and if you want it you can have it. Standard black vinyl 90 centre seat. Don't have the lap belt anymore as this went to someone on the forum a while ago.
Cheers
Ivan
Just a note of caution here. I had the same problem and did exactly what Les said to do. Problem is that the I (eye) bolts that fix the barcket to the chassis are on back order at Land Rover. Consequently I have just bolted the brackets in place temporarily (to pass MOT) until the new I (eye) bolts come into stock.
HTH
Ivan
John
Not sure if you are serious but I have a decent set of 7.50 Trac Edges on my Disco which won't be going anywhere in the next 2 weeks. You are welcome to borrow them if you want. Will need a spare set of wheels so it's not asitting on it's discs though
Ivan
Here you go steve here. Need to scroll down a bit or do a search. No timings but it's being held at Eastnor. Just type Eastnor into streetmap and it will give you directions.
Eastnor
HTH
Ivan
Dunc
Not sure what tyres they are above but, I just got a set of Cooper Discoverer STT's (Mud Tyres) delivered to my door for £85 a corner. They are not the new model but they are still very good tyres. Got them from Sinton Tyres in Milton Keynes. They may still have some of the old ones left in the size you want.
Rgds
Ivan
Went to get my aircon recharged today and it turns out I have a leak on the compressor. Can they be rebuilt ? Does anyone have part numbers pointers etc for the seal(s) ?
Cheers
Ivan
Gary
If I rememebr correctly you can get to all of the heater stuff if you drop the passenger glove box. The heater motor is in the passenger footwelll and its only 3 bolts to take it out.
HTH
Ivan
Jason
I have Disco wheel on my 90. The only problem you may find is that the wheel studs are not long enough. To stop them rubbing (although I had no problems) adjust the lock stop.
HTH
Ivan