Jump to content

pete3000

Settled In
  • Posts

    1,309
  • Joined

  • Last visited

  • Days Won

    5

Posts posted by pete3000

  1. +1 for Ashcroft transmissions, we've used them for diy swap on transfer box then a drive in swap on the auto mainbox. (their drive in service price included a hire car and fluids). Which was a nice day out at bletchley park. Not sure if there is a garage close to you who could do the work (noticed you'd quoted euros)

  2. Hi Folks,

    Looking to get a new battery for my 1997 Defender 110 300Tdi

    Thoughts on the following or other better options welcome.

    Simon...

    http://www.halfords.com/webapp/wcs/stores/servlet/ProductMobileDisplay?catalogId=10151&langId=-1&categoryId=165762&productId=734844&storeId=10001

    as Bowie69 says tayna, good pricing excellent delivery, got a couple of Numax marine/leisure in my battery box, cxv27 or 24's can't remember, lasted 4 years so far.

    they sell the ctek chargers well priced as well.

  3. Trying to make TG work after the event is a mistake IMHO, if they wanted a fresh look with some new presenters i'm thinking semi-seroius drivers/reviewers Steve Coogan, VB Henderson, Sabine Schmitt, Jason Plato and for a stig/challenge features Johnny Vegas, Colin Furze and Gino de Campo. Anyone else any ideas?

  4. to connect the two reds together, there should be both parts of a round 2pin plug socket connector behind the glass fuse box panel. And as some others have said the tail lights work seperatley from the front side lights/cluster lights.

    You can see the connector over towards the right hand side of the diag below, next to rear fog switch no.97

  5. how many watts are the spots?, just thinking if you have a bad earth and the voltage is lowered the current will try and increase to keep up. Hence the fuse getting warm, especially if you are near the limit.

    If the cable is up to it between the fuse and the spotlights you could use a 15A fuse to each. how thick are the wires feeding the lamps

    55w/12v= 4.6A~ each lamp

    if they are on with lower voltage

    55w/9v= 6.1A ~each lamp

  6. Hikvision, sounds cheap nasty chinese, but wow for the price the quality of their 2 line stuff is impressive 3mp ip cameras and recorders for not much money.

    no affiliation, apart from this is the third lot of their kit we have bought for work/home. outperforms the axis/panasonic kit we have hands down.

    cameras etc from £104 each

    http://www.cctvkits.co.uk/brands/hikvision/hikvision-ip-range.html

    http://www.cctvkits.co.uk/hikvisionds7604nvr.html £150 (need to chuck a sata disk in of your choosing to record)

  7. Think i'd be looking at the bulkhead more closely, if they have bodged the heater into a RHD steering slot, have they secured the steering brackets correctly?, looks like the footwell panels have had repair/plates over them.

    The hole for the heater should be square/rectangular, and there should be a piece of sealing gasket you can buy to seal properly.

    Have the rest of the bits been swapped over properly, i.e lower dash heater box/wipers. The brake pipes look to have been replumbed

×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy