Jump to content

Ali Zafar

Settled In
  • Posts

    23
  • Joined

  • Last visited

Everything posted by Ali Zafar

  1. Hi,I have the same issue and I have taken my car to the dealership twice and they had no idea about this issue. I got them to hook it up to the system called T4 which apparently is LRs genuine diagnostic system for the TD5. However, I tried going through the menus but couldn't find any option to turn the fans off.If anyone here is familiar with this system, can you please guide me going through what menus will lead me to an option to turn this forced assist off.You help is much needed and would be really appreciated!!I am from Pakistan and the TD5 Defender was never launched here but the dealer has some experience with TD5 Discos.
  2. Hi,I have the same issue and I have taken my car to the dealership twice and they had no idea about this issue. I got them to hook it up to the system called T4 which apparently is LRs genuine diagnostic system for the TD5. However, I tried going through the menus but couldn't find any option to turn the fans off.If anyone here is familiar with this system, can you please guide me going through what menus will lead me to an option to turn this forced assist off.You help is much needed and would be really appreciated!!I am from Pakistan and the TD5 Defender was never launched here but the dealer has some experience with TD5 Discos.
  3. I don't have an immobilizer. I have a standard all metal key.
  4. So I didn't secure the battery and the positive battery terminal hit the front wall of the battery box when I went over a bump. I heard a loud shrill noise from under me(LHD) and the engine died. The picture is after I have re positioned the terminal on the battery. Does that mean the ecu is shot? I dont hear the fuel pump and no glow plugs indication on the cluster. I disconnected the ECU and I still have the same number of lights going off on the cluster as with the ecu connected. Is there a way to check the ecu? I checked ALL the fuses and they are fine. Its a 2001 10p TD5 Defender 110. ECU MSB000080 Is there a way to confirm if the ecu is dead? And if it is, what are my options? I am based in Islamabad Pakistan and an ECU, NNN500020 is available to me can I use that I am not sure which vehicle it is from. Appreciate your help!
  5. Okay... Thanks for the details! I heard that Defender TD5 does not use any of these parts; only Disco II TD5 uses them.... is that true?
  6. Okay... I tapped mine into place too with a socket, socket did leave a mark on each washer but hopefully its all good.
  7. Thanks! I will put them in the head first and then tighten them with the injector clamp. I did touch the tip of the injectors... cleaned the carbon of with fine sand paper using light pressure.
  8. I am doing the injector seals and O rings job on my car but I am kind of stuck now. The new seals are genuine LR part but they wouldn't go past the mid point on the injector nozzles. Am I doing anything wrong? I have cleaned the tip using fine sand paper and there's no carbon left on the tips but that's not helping. I tried forcing them a little but to no joy. Don't want to damage any thing since nothing is available here.... got these from Dubai as well. Do I place the washers in the head first then install injector and use the clamp to seat them in place by tightening the bolt? Is that the correct way? Would that damage anything? Also, I washed the injectors with petrol... is that okay??2. How do I clean the red socket.. what and how to use? How do I clean the whole loom.. from the injector socket to the red socket? How do clean the MAP sensor.. what and how to use? My glow plug sockets were very brittle and I broke all 4 of them while removing them.... whats the fix? Please help!
  9. The person bypassed it by connecting the terminal 3 and terminal 4 for the switch, together... Everything else is original.
  10. Got it! So even if this is faulty and I leave every thing the way it is (bypassed)... The down side would only be that the top lights would work with the engine off...right? But why are all the lights weak?? They don't have enough juice in them... the way they used to be?!
  11. Thanks... Nopes I don't have a rear screen heater. How can I check the VSS? Can I check it in the car using a multimeter? Or any other easy way to do it?
  12. I have a Tomb Raider Defender and yes the STC 16888 is for the roof mounted lights. What is this part, whats its function and how does it work? How can I check if mine is faulty... in simple terms please.... My electrician says its bad so he bypassed it but I'm sure he doesn't know what it is and how to check it. Now all of my lights are weak the top ones as well as the headlights I'm not sure if this happened as a result of removing the VSS or for some other reason since I can't recall the time. Is there a seperate VSS for the headlights too? Thanks!
  13. Which one of these would fit defender TD5 with geniune roll cage? would mantec DA2224 fit with the roll cage?
  14. Hey guys! My defender is leaking oil from between the transferbox and the gearbox. I heard there is an oil seal and O-ring in there and thats what needs to be replaced. Would any one the name and the part number for the oil seal and O ring, so that I can order the correct parts. My car is a TD5 with R380 gearox and LT230Q transferbox. Thanks is advance!
  15. Hey guys... The crankshaft damper on my 01 TD5 defender broke. I want to know how to replace it? Is there any thing I need to be cautious about while I am at it? And would the timings need to be disturbed? Really appreciate the input. Thanks!
  16. Hi guys! I need to order a few parts for my Defender TD5 and I was wondering if you could help me with it. If you know where I can find quality parts at a cheap price. Clutch kit, crankshaft damper, crank spigot bush, rear A frame ball joint. Appreciate the help!
  17. Yup i will be ready to do the parts exchange if some one wants the LHD drive parts. Would some one know a dismantler who can supply the parts needed for the conversion?
  18. Hello guys!! Hope all of you are doing great! I need some help! I have a Defender TD5 2001 110 crew cab. Its left hand drive at the moment and I need to convert it to right hand drive. I don't know what new parts i will be needing and which old ones can be utilized. If any one has done this before or if they know what I'm going to need, please help me. Or if there is some one who can sells all the parts in a shape of a conversion kit. I will really appreciate the help. Thanks in advance.
  19. Thanks Jim... really appreciate the effort you made. I'll check my engine number and place the order. Thanks again.
  20. Hello, My cars water pump is faulty and i need to order a new water pump. I was wondering if any one can give me the part number for my defenders water pump. Its a 2001 Land Rover Defender 110 TD5. With air con. I''ll really appreciate it. Thanks.
×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy