thanks guys
it is engine oil and i have checked the run off pipes it must be coming up the injector, i didn't think there was supposed to be oil in there.
hi all
could anybody offer an explanation as to what is causing oil to be running out from the injectors, i first thought it was from the rocker cover gasket but looking closer it is coming from the injectors
many thanks
just a quick update
i have checked all the hoses this morning and they are all clear and they don't crush under load,
has any body else got any suggestions.
thanks
paul
hi mate
nobody has messed about with the pump well not that i am aware of anyway,
and the air filter is brand new it was fitted last week to try a fix the problem,
does this meen that my pump is knackered.
paul
hi all
i have noticed the last few weeks that there has been a lot of black smoke coming from the exhaust but mostly when going up hill, but the last two days it seems to be constant as long as i am accelerating.
any ideas what could be the cause and possible cures
many thanks in advance
paul
hi all
i need a new nut that goes on the output shaft of a six bolt pas box as mine split when i took it off and the new box did not come with one, i can't find one locally at a realistic price (quoted £15.28 +vat at local 4x4 centre}
i was wondering if anyone knew the thread size so i could try enginneering places.
thanks
flocks
hi all
the landy needs a new x cross member and i am planning on making my own but was wondering what wall thinkness it should be.
i spoke to a steel stock holder today and the thinnest they have in stock is 5mm wall, this seems a bit thick and heavy to me, it weighs something like 25kgs for the length required.
any help would be great
many thanks
flocks
hi mate i used to be a locksmith and if you go to or ring up your local auto locksmith he can cut a new key for you using the code stamped on the key head.
good luck
hi all
i picked up my diaphragm kit today and is a bag full of copper washers and rubber o rings and a few other parts
to be honest i haven't got a clue where half of them go
does anyone have a strip down diagram/exploded view of this part of the pump to help me reassemble mine
many thanks
paul
dave thanks for your your very kind offer but after spending most of the day on the phone i have managed to track one down locally
i was told it is only available as a kit and the cost is £28.00 incl vat does this seem about right
i am hoping to sort it tomorrow
will keep you all posted