V8SMYMATE

i WOULD CHECK THE COIL FIRST AS THE IGN MOD IS A PAIN TO CHANGE

thx i will let u know

It maybe the area? but my area is considered quite good tho?

thx i will try them

have you got a tel number please

Hi i wondererd out there who has agreed value insurance on there truck if so can some one give me the best ones to try. I am with ADRIAN FLUX at present but they cant offer agreed value insurance as i cant garage the rangie overnight as it will not fit in, so they wont do it. Any help on who would ? Thanks Duncan

Thanks for your advice Gents, some thing simalar that older vechicls will be exempt and the new regs will be for new offroad vechicls, so i am off to buy them. Duncan

thanks i also found this on devon 4x4. Hi XXXXXXX, Good question, at some stage, I believe, yes, along with any other tyre that is not “S” rated, this will rule out virtually ALL mud tyres, those that get a rating are likely to be cost prohibitive. There is also the issue of the oil that is used for the manufacture of this type of tyre which is likely to take the cost of manufacturing beyond most people’s means. I am told by those in the know, that within two years these tyres won’t be available. I don’t believe that it will effect an individual that already owns tyres such as these but they will no longer be legal to sell. I don’t know if there will be a way around these new laws such as sales to forestry workers only time will tell. These comments are only my thoughts and understanding of the situation and are not necessarily correct, if you want a definitive answer I recommend that you contact the DOT. best regards Simon

Banned from selling them in the future

Hi all, I have been hearing people say that off road tyres are going to be banned can anyone confirm or deny this? as i am about to buy another set of larger off road simexs, thanks all

Thanks for that anyoneknow someone local?

Hi all its been a while since i posted but need your advice, i have bought a 1995 disco v8 3,9. i am looking for someone who rebuilds this type of engine ie topend (camshafts tapetts cam followers etc)and also bottom end rebuild, i know je and rimmer do this type of thing but are out of my price range. is there some one around Wolverhampton area (i am willing to travel)if some one can recomend me someone also what do you guys reckon the cost would be. thanks Duncan

Thanks i will check all hose and pressure. this does seem to fit my with my starting issues.

Thanks i will look in the tech archive and test

r Thanks for your post I am talking about starting from cold. i have not replaced the fuel filter, i will try that next? but reading your post maybe i am being too crictal as it will normally start 1.5 - 2 seconds.