can i have info/pics of rear radiator set ups?
trying to retain series front end on my trialer but unsure on pipe running etc?
anyone have info or diagram showing how they have plumbed?
thanks
hi will series 2 windscreens fit a series 1 86" frame?
my reason being devon 4x4 sell heated windscreens for series 2 only??
http://www.devon4x4.com/products_b/p939c219/heated-windscreen-for-series-land-rovers.html
any ideas or even if some one can tell me the glass is the same size?
thanks
phill
rite ok then thts me sorted im going over to megasquirt,
as u say the flapper system was abodge but i did need it to run sort of just to move it in and out of the workshop i was at,
now the cars home i dont have to move it and can spend time doing the thing properly,
does the mirosquirt plug need to be wired difernetly to megasquirt? if so wot is the pin outs??
thanks for help chaps
phill
rite then im after sum directions in which way to go regards my v8
the spec of the thing reads as follows:
(and is all brand new)
its a rover 4.6 v8 coscast cross bolted block,
4.0 pistons
new crank and rods etc
its got stage 3 rpi heads with the 3.5 combustion chamber (hence 4ltr pistons)
rhodes lifters
cyclone cam with vernier pulleys
pre-serpintine front end
efi with 3.5 components except
3.9 injectors and inlet manifold
hedman headers
fse rising rate fuel pressure regulator
and a few more bits and bobs lol
the problem im having is ive got it to run on the 3.5 efi system with flapper and all
that surprised my the most but after having it running a little while its very rich
now i know i was being optimistic that the 3.5 efi would cope but what is the best option next?
peoples options
dump efi use a webber 500 carb set up (not sure of this because still doesnt help me in the water?)
change to 3.9 efi system and chip the ecu for megabux!
convert to megasquirt?
convert to microsquirt?
a freind is trying to stop me going megasquirt because it will be hassle tuning?
to make this even more complex my engines in my series 1 hybrid that im still building so cant be taken on the road for shakedown/testing!
anyone that can help with their views on which is best way to go for max power/torque and off road ability? no worried about mpg at the mo
any help plz
phill
i didnt relise triggerwheels did ms1?
they only list microsquirt
id like to get it from triggerwheels because i like the packages they sell
thanks phill
cool
any ideas where i can get hold of a ms1 on a v3 board kit from?
id be interested in the complete plug and play kit wiring loom price?
who sells the plug and play wiring kit?
ive been serching the internet for supplyers and most of them are in usa, id
rather buy from the good old uk!
thanks
phill
tried to pm mr fridgefreezer and it says member cannot recieve any new messages????
all i wanna know is?
is it better to go for full megasquirt for my rover v8 due to low injector current of microsquirt?
which is better megasquirt 1 or 2??
how much a complete megasquirt kit is for my rover v8?
what parts are supplied?
how quickly can i get the parts?
and how much delivery to the isle of wight?
any help plz
phill
cool info chaps,
can someone tell me where to get hold of the full megasquirt kit instead
of microsquirt then please if thats the better way to go for my v8?
thanks
phill
hi
is this really all i need to be able to megasquirt my rover v8? or do i need extra map sensors etc?
http://trigger-wheels.com/store/index1.html they sell the complete microsquirt system for rover v8s?
any reviews on this company?
what are the differences between microsquirt and megasquirt?
is that a good price??? (thats the big question i wanna know?)
any ideas or help plz
thanks
phill
hi
im building a 93" series one v8
ive run into a problem with the exhaust and i cant find away around it so if any one has pics of the underside of any rangie v8 or d90 v8 it would be v.helpfull
thanks
phill
hi ive got a 97" 3ootdi disco
my problem is on hot overrun theres loads of white smoke coming from the exhaust? only hapens when its hot and not speed dependant?
ive checked for headgasket signs and visible leaks and found nothing?
anyone got any ideas??
thanks phill