laro4x4 Posted April 7, 2017 Share Posted April 7, 2017 Hello, first of all, sorry for my bad English, I'm from the Netherlands. I'm rebuilding a nice RRC (lhd) and want to use a Mazda SL35Ti engine, but in a left hand drive the steering box is on the left side and there is no place because of the steering pump of the Mazda engine. I have removed the steering pump and now I can fit the lhd 4 bolt steering box. Now I was thinking of fitting a electric/hydraulic steering pump from a Citroën Saxo/Peugeot 106. What do you guys think of that? I can place the pump were I want. The original bracket of the Mazda ps pump does not fit on the right side of the engine. Who can give me a good advice? Many regards, Bart van Dessel Quote Link to comment Share on other sites More sharing options...
Arjan Posted April 8, 2017 Share Posted April 8, 2017 Bart - please look at the int. section for the reply. Quote Link to comment Share on other sites More sharing options...
Blanco Posted May 17, 2017 Share Posted May 17, 2017 @Arjan, I can't find the moved post did the title change?? Quote Link to comment Share on other sites More sharing options...
paintman Posted May 17, 2017 Share Posted May 17, 2017 It's in the Modified Vehicle Builds forum: Quote Link to comment Share on other sites More sharing options...
Blanco Posted May 18, 2017 Share Posted May 18, 2017 Silly me, I was looking in the International Forum. ....... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.