Defender90Dave Posted August 30, 2017 Share Posted August 30, 2017 Does anyone know of a stockist for the Kenlowe Electronic thermostat with 2 temperature setpoints for 2 speed fans or if not a supplier of a replacement product. I have just found out mine is not working. Any help would be appreciated as im really stuck on this one. Regards, Dave 1 Quote Link to comment Share on other sites More sharing options...
V8 Freak Posted August 30, 2017 Share Posted August 30, 2017 If you cannot find Kenlowe replacement, why not try X-Eng / Foundry 4X4?? (I would normally just post a link but the board software seems to be prohibiting this at present....) Quote Link to comment Share on other sites More sharing options...
FridgeFreezer Posted August 30, 2017 Share Posted August 30, 2017 There's a 4-relay circuit a few of us on here use that makes use of standard 3-pin fan switches (Intermotor make them), it's most likely in the technical archive. A variation on this is the Freelander 1 has the same circuit (4 relays) in a little black box under the bonnet - if it has two electric fans (I think aircon equipped ones do) you can find them, or they're around on ebay for about a tenner. The wiring is nicely documented in the RAVE manual electrical section. Adjustable set-point I can't help with but the intermotor switches come in a range of values. 1 Quote Link to comment Share on other sites More sharing options...
Defender90Dave Posted September 5, 2017 Author Share Posted September 5, 2017 Thank you everyone for the info. I am going to check out "FridgeFreezer's" soloution. Quote Link to comment Share on other sites More sharing options...
zardos Posted September 6, 2017 Share Posted September 6, 2017 I run mine with an intermotor dual temp switch and just 2 relays as the dual speed fan only takes 18/24 Amps (So the second speed additional windings only take an extra 6 Amps) so a 40Amp relay is plenty to run a fan. Fridge probably means this post Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.