Jump to content
Sign in to follow this  
tdi

front facing rear folding seats question

Recommended Posts

I have a question for those of you who have front-facing folding rear seats on your 90 or 110.

When the brackets and seats are mounted as shown in the attached photos, and the seat is latched downward onto the bracket, there is a gap of approximately 0.2-0.25" between the pointed tops of the lower bracket and the seat frame as shown.

1. Is the seat frame supposed to be resting on the pointed tops of the bracket?

2. is there supposed to be some kind of bumper or something between the pointed tops of the bracket and the seat frame?

3. Is the gap supposed to be there?

seat2.jpg

seat1.jpg

Share this post


Link to post
Share on other sites

IF you are putting the puma rear seats into an  older tdi  then you need to add spacer blocks as the the wheel arch boxes of the puma and tdi are different 

Share this post


Link to post
Share on other sites

It's a fairly comprehensive "tweak" to the tub...the kit includes the recessed skins for inside the tub as well as the strengtheners that go underneath and the chassis brackets. It's as close to factory as possible 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy