Hercu Posted August 3, 2018 Share Posted August 3, 2018 The Disco is up and alive and the knocking sound was a hydraulic lifter and replaced all on the one bank Now the disco is over fueling madly and had the Injectors tested but with my limited knowledge I do not know what the report says Must I replace only no 1 Injector/ is that the problem ? The other 5 seems to have passed all tests.... is it Good...OK...Fair or Bad and on the border line ??? CRB_282018_1113_31454 NO_ 1.pdf CRB_282018_1129_31242 NO_ 2.pdf CRB_282018_1147_31436 NO_ 3.pdf CRB_282018_1159_31581 NO_ 4.pdf CRB_282018_1211_31456 NO_ 5.pdf CRB_282018_1222_31438 NO_ 6.pdf Quote Link to comment Share on other sites More sharing options...
Richard Mills Posted August 3, 2018 Share Posted August 3, 2018 In my opinion injector No1 is not delivering enough, but it is marginal. A round of injector cleaner should fix it. The test results are very detailed, a good report. On the V6, it's normally injector 6 that overheats and fails. 1 Quote Link to comment Share on other sites More sharing options...
Hercu Posted August 4, 2018 Author Share Posted August 4, 2018 12 hours ago, Richard Mills said: In my opinion injector No1 is not delivering enough, but it is marginal. A round of injector cleaner should fix it. The test results are very detailed, a good report. On the V6, it's normally injector 6 that overheats and fails. Thank you, Yes the difficult one to remove, underneath the loom... No 1 is a fraction out according to the test and certainly a good round Injector cleaner should do the job..Thank you Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.