wayne1978trucks Posted August 19, 2018 Share Posted August 19, 2018 Im rebuilding the b reg 110 csw back to its original spec and found a lovely 13c LT95 Gearbox, however the handbrake drum and bits are missing. on looking in all my parts catalogues I cant find a specific list of part numbers, what more confusing is the drum is the huge one that is usually found on the lt95 part num 90576624 but the handbrake seems to differ from range rover classic and 101fc where they have a lever operator that enters the top of the backplate coinciding with a 606737 backplate my backplate has a hole at 3 and 9 oclock which makes me think a standard expander and adjuster were used however the shoes and drum were the larger one. have I gone mad or do any of you know where im going with this the pic on page 434 of my 90/110 workshop manual 1983-1992 seems to support my theory. ps don't know if this is the correct place to post this or whether it should be in part number requests. thanks wayne Quote Link to comment Share on other sites More sharing options...
neil110 Posted August 19, 2018 Share Posted August 19, 2018 the Land Rover One_Ten parts catalogue covering vehicles pre august '86 is your friend. Only available on paper as far as I am aware. It only lists one transmission brake assembly despite listing various gearboxes and Transfer boxes. Page310 back plate AEU2733, drum FRC3502, shoes RTC3403, adjuster 37H4558L, service kit for adjuster 8G7019L, expander AEU2734, service kit expander AEU2735, drawllink AEU2736, shoe return spring 2off FRC3234, dust cover 515466, plate locking 515467, plate locking 515470, plate spring 515468, bolt 2 off AEU2737, washer 2 off AEU2738, screw fixing drum 2 off SA108201L, oil catcher FRC8093, bolt transmission brake 4 off AFU1400 Quote Link to comment Share on other sites More sharing options...
wayne1978trucks Posted August 19, 2018 Author Share Posted August 19, 2018 ive just had a point in a direction.....the attached pic is one off a 110 v8 with an lt95. where I think im getting confused is the gearbox that was in the 110 before was a 355 serial number so was prob a rage rover box with a range rover drum. still confused. Quote Link to comment Share on other sites More sharing options...
wayne1978trucks Posted August 19, 2018 Author Share Posted August 19, 2018 mint thanks neil, Ive just found that page and I think with the pic and your input that's the way to go...….glad I didn't spend £70 on the larger drum now, phew🙂 just confirmed the backplate I have got on the box is AEU2733 and the carrier is the one pictured on page 319 item no 4 thanks again neil👍 Quote Link to comment Share on other sites More sharing options...
western Posted August 19, 2018 Share Posted August 19, 2018 from my up to 1986 110 parts book. Quote Link to comment Share on other sites More sharing options...
wayne1978trucks Posted August 19, 2018 Author Share Posted August 19, 2018 thanks western im rattling the list off now. 1 Quote Link to comment Share on other sites More sharing options...
Ex Member Posted August 20, 2018 Share Posted August 20, 2018 You can download the parts catalog here: http://red90.ca/rovers/Manuals/Land_Rover_110_Parts_Catalogue_-_to_August_1986_-_RTC9863CE.pdf 1 Quote Link to comment Share on other sites More sharing options...
LR101GS Posted September 17, 2018 Share Posted September 17, 2018 I have just converted a 110 v8 lt95 gearbox to fit my 101 I have the long bell housing,extended input shaft,brake back plate and drum! is this any good to you? in UK. Open to offers! :-) Quote Link to comment Share on other sites More sharing options...
wayne1978trucks Posted August 8, 2019 Author Share Posted August 8, 2019 LR101GS probably a late reply, i did realise i had got the bits on a gearbox in the shad as it wasnt the special larger drum after all. thanks for the offer, im sure if you post the bits in the for sale section then you will get takers. thanks wayne Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.