Maverik Posted December 2, 2018 Share Posted December 2, 2018 Hi folks, Just stripping down an axle from 96 D1 and much to my surprise i found this when i popped the diff out... is this a common failure (see photo)? Quote Link to comment Share on other sites More sharing options...
Bowie69 Posted December 2, 2018 Share Posted December 2, 2018 Definitely not unheard of. Quote Link to comment Share on other sites More sharing options...
Snagger Posted December 6, 2018 Share Posted December 6, 2018 Common enough, and I think in much smaller form may have been the cause for the repeated shearing of the cross pin retaining roll-pin in my wife's 2009 90 (they replaced the two circlips with one roll-pin through the end of the cross pin and carrier). I think this is one of several reasons why Nige doesn't stock standard Rover diffs, just heavier duty stuff. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.