adian Posted January 14, 2019 Share Posted January 14, 2019 Hi All Does anyone have the CAD design for the Flex plate for the V8 Petrol HSE Would be greatly appreciated Kind Regards Adrian Quote Link to comment Share on other sites More sharing options...
Simon_CSK Posted January 16, 2019 Share Posted January 16, 2019 Aidan Welcome to the forum. this was brought up a few weeks ago and I don't think there was any available. Quote Link to comment Share on other sites More sharing options...
JohnnoK Posted January 20, 2019 Share Posted January 20, 2019 On 1/16/2019 at 1:10 PM, Simon_CSK said: Aidan Welcome to the forum. this was brought up a few weeks ago and I don't think there was any available. Yes, 'twas I. Still looking for one and will post up as soon as I get lucky. Quote Link to comment Share on other sites More sharing options...
Simon_CSK Posted January 20, 2019 Share Posted January 20, 2019 get me the dimensions it will take minuted to draw up. Quote Link to comment Share on other sites More sharing options...
JohnnoK Posted April 7, 2019 Share Posted April 7, 2019 OK, so after much to and fro, here is what a mate knocked up for me. I haven't checked it for accuracy, so don't hold me to it, I will cut one in 0.5mm first to compare with me dead one when I do the job. P38 flex.DXF P38 flex.pdf Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.