Don Penny Posted January 31, 2019 Share Posted January 31, 2019 I want to move my SPA Boost Pressure Sending Unit location from the turbo hose to the Intake Manifold.I am not familiar with the casting design of the Td5 Intake Manifold, but does anyone know what the actual function of what looks to be a "blow out plug" on the rear of the Td5 Intake Manifold? And secondly, does anyone know if it would be a bad or good idea to tap that area with a 1/8 BSP tap? Is the area thick enough to handle threading?Here is a pic of the area in question. I prefer to tap this area since it would eliminate the need to run the sending unit wires down the length of the manifold. Just a cleaner installation and shorter run for the wires. Thanks in advance. Cheers. Don Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.