Jump to content
Sign in to follow this  
Cornish Rattler

Series 2a diesel fuel tank to lift pump fuel pipe

Recommended Posts

Hi guys

Looking at purchasing one but need the part number if anyone has it please, I also need the part number for the return pipe as well please, thanks.

Share this post


Link to post
Share on other sites

The part number for the feed pipe, underseat tank to lift pump, up to engine suffix J, is 552435, but no-one appears to hold stock.

For engine suffix K onwards, without a sedimentor fitted, the number is 564898, but no-one appears to hold stock.

With a sedimentor fitted the part number is 564936. The pipe is underseat tank to sedimentor.

The return pipe is less clear; I cannot see one listed for the 2.25 engine.

I suspect your best bet is to go to a motor factors with ALL the elements you want, pipe, olives, nuts, etc, and buy the individual components. You may have to buy the nylon pipe by the metre, and finish to the exact length as you install it. Also make sure you have the appropriate pipe clips to stop the pipe waving in the breeze, and of chafing against any metalwork.

Regards.

 

 

Share this post


Link to post
Share on other sites
12 hours ago, David Sparkes said:

The part number for the feed pipe, underseat tank to lift pump, up to engine suffix J, is 552435, but no-one appears to hold stock.

For engine suffix K onwards, without a sedimentor fitted, the number is 564898, but no-one appears to hold stock.

With a sedimentor fitted the part number is 564936. The pipe is underseat tank to sedimentor.

The return pipe is less clear; I cannot see one listed for the 2.25 engine.

I suspect your best bet is to go to a motor factors with ALL the elements you want, pipe, olives, nuts, etc, and buy the individual components. You may have to buy the nylon pipe by the metre, and finish to the exact length as you install it. Also make sure you have the appropriate pipe clips to stop the pipe waving in the breeze, and of chafing against any metalwork.

Regards.

 

 

Thanks Dave, its just that I remember removing the feed pipe when I stripped the 2a down but can't think of the life of me where I have put it, I do have a parts catalogue which shows the fuel tank, sender, stack pipe and return stack pipe but doesn't show the feed or return pipes so it looks like I will do as you have said and go to my local motor factors 😉

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy