bobed90 Posted September 29, 2019 Share Posted September 29, 2019 Hi guys. I'm having issues with my project 110 clutch. The truck has been moved intermittently over the last few years but has always driven fine. I've recently gone to move it and the pedal would get stuck and the truck would not go fully in gear, it would still try and move though. I've just changed the slave and master cylinder and although the pedal no longer gets stuck I still have no clutch. Any ideas what it could be? Thanks Quote Link to comment Share on other sites More sharing options...
western Posted September 29, 2019 Share Posted September 29, 2019 Clutch friction plate stuck to flywheel maybe Quote Link to comment Share on other sites More sharing options...
bobed90 Posted September 29, 2019 Author Share Posted September 29, 2019 If that's the case would I need to take the box out or is there another way to free it off? Quote Link to comment Share on other sites More sharing options...
western Posted September 29, 2019 Share Posted September 29, 2019 box or engine out to free it off. Quote Link to comment Share on other sites More sharing options...
Mo Murphy Posted September 29, 2019 Share Posted September 29, 2019 Sometimes vigorous bump starting can free off a stuck friction plate. HTH Mo Quote Link to comment Share on other sites More sharing options...
Yostumpy Posted October 1, 2019 Share Posted October 1, 2019 Can't you put into first , depress the clutch, with brakes on, and turn the starter key, that normally frees a stuck clutch. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.