jessejazza Posted October 8, 2019 Share Posted October 8, 2019 (edited) My first attempt - must be an easier way. The last part i found was the hardest *****629 (last but one pic) I had to stand on the rim and use the 2nd crowbar to rotate the rim out of the tyre. Note the blue scissor jack has a nut welded on - makes a scissor jack a useful bit of kit (once one has cut off the silly loop and added a nut). The crowbars were Gorilla 36". I thought I would give it a shot when ATS quoted me £18 per tyre - I found trouble getting 235/85 x 16 and got some on ebay for £75 each (then found the added bonus of being commercial tyres). My kit car is on axle stands (rear on wheels) and I wondered if it was worth a try. Be grateful for any tips inflating as one has got to seal the tyre against the rim first. Edited October 8, 2019 by jessejazza Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.