hurbie Posted December 3, 2019 Share Posted December 3, 2019 hello all , has anybody tried the stainless brake caliper piston's from brit-part ? i would'nt use the seal kits , but wonder are the piston's any good ? i contacted zeus to ask if they still sell there pistons , but never got a replay (and can't find them anywhere for sale either) Quote Link to comment Share on other sites More sharing options...
TSD Posted December 3, 2019 Share Posted December 3, 2019 The last set I bought were EAC pistons which can be bought here Quote Link to comment Share on other sites More sharing options...
ianmayco68 Posted December 3, 2019 Share Posted December 3, 2019 I brought the same one’s as TSD , the whole kit was good quality. Quote Link to comment Share on other sites More sharing options...
western Posted December 3, 2019 Share Posted December 3, 2019 Got a full set from there for my 110. Quote Link to comment Share on other sites More sharing options...
oneandtwo Posted December 4, 2019 Share Posted December 4, 2019 (edited) I have had Britpart s/s pistons for many years in numerous vehicles, they are excellent. I’ve just removed a set of them from an old 90 I was using for launching boats, The caliper castings were knackered but I’ve removed the Britpart stainless pistons which are at least 5 years old and they are still like new, in fact I’ve just refitted them into new calipers. I had a set from Zeus many years ago and to be honest I couldn’t tell the difference . Some Britpart stuff is very good - their stainless steel swivel housing seal retainers and brake shield mounts for example. Edited December 4, 2019 by oneandtwo Quote Link to comment Share on other sites More sharing options...
hurbie Posted December 4, 2019 Author Share Posted December 4, 2019 did you use the seals with them or went for a different brand ? Quote Link to comment Share on other sites More sharing options...
oneandtwo Posted December 4, 2019 Share Posted December 4, 2019 No, I’ve always bought new calipers and swapped the pistons out for stainless. Quote Link to comment Share on other sites More sharing options...
Waldorf Posted December 4, 2019 Share Posted December 4, 2019 I have the Britpart stainless pistons on the 110, and they are fine. I used a Lockheed seal kit. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.