bigger hammer Posted March 8, 2020 Share Posted March 8, 2020 hi...my p38 will run for 20 mins then stops, cranks over fine, just not going. all rest is good...leaver her to cool down for a few hours, she's fine for another 20 mins.was advised to get a new crankcase sensor...did so from Atlantic British...but cannot get the old one off, just cannot access the c clip to unhook the old one from the wiring harness...have taken out the inner wheel arch,. got her raised up on ramps, but still cannot get my hands on the little bugger...dont want to bust or bend any of the pipes around there...and the tin heat shield over the exhaust has got many rusted in and worn bolts so dont want to ruin those too...any ideas anyone? Quote Link to comment Share on other sites More sharing options...
Puffernutter Posted March 8, 2020 Share Posted March 8, 2020 Which engine? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.