Jump to content
Sign in to follow this  
Rob Windsor

Lightweight 73 Series 3 wiring loom question

Recommended Posts

Dear All,

I have a much loved series 3 lightweight LR 1973 and wish to renew the wiring loom.  Can anyone suggest a part number or wiring loom?  It is 12v negative earth, petrol 2.25.

Thank you,

Rob

Share this post


Link to post
Share on other sites

There's a company that makes them up for you.

Not perfect, but very close.

 

Auto sparks. I need to order one for my 72 lightweight, now that you reminded me.

 

Share this post


Link to post
Share on other sites
Posted (edited)

In my experience, with something S3 vintage anyway, you'll not need to replace the loom. Solder and shrink-wrap, and a scrap loom from eBay usually does a very decent repair for all those PO bodges. Of course if it's past that point...

Edited by Landrover17H

Share this post


Link to post
Share on other sites

Mine is past that point.

All that remained when I took on the project was a few earth straps, and a chunk of battery cable that was used to power a winch at the back.  It was a trials truck.

So am starting from scratch.

 

Unless someone has a pristine lightweight chassis loom going spare?

Share this post


Link to post
Share on other sites

I fitted a complete auto sparks loom to the 88 a few years ago and I can’t fault it. It came apart this afternoon just as easily as it went in. I wouldn’t play around with decades old wiring, just bite the bullet and fit a new one.

Share this post


Link to post
Share on other sites

They're closed. For the duration of the event.

Share this post


Link to post
Share on other sites

The loom is simple enough for you to build your own.

On the S2 forum there are a selection of easy to follow wiring diagrams, it allows you to make those small mods.  I rewired my S2 for about £70 a few years ago using the diagrams as a starting point.

Some people recommend using  trailer cable to wire the rear lights

Peter

Share this post


Link to post
Share on other sites

I think with the lightweight it depends on what you would like to end up with.  By this I mean the lights - which are much more complicated with options like convoy lights which extiguish al others and that sort of thing.  Otherwise I don't see any reason why you can't wire it as a civilian S3.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy