Jump to content

Front Brake Calipers for 1998 110


Recommended Posts

I need to replace my calipers and would like some help finidng the right part number. I plan to rebuild the ones I have but need a cheap pair to see me until I have time to do it.  I'm a bit confused on what to get. The vehicle is a 1998 300tdi 110 county, vin number WA147XXX. Discs are vented and the retainers are the spring type not the flat plate. The current calipers are Lockheed, I think the codes are LB10TY017AC and  LB10TY018AC but I noticed from another thread that someone had the same code on their calipers and had non-vented discs. In any regard I want to refurb the ones I have so really just need to get hold of some cheap ones to get me back on the road.

When I put my vin number into the LRWorkshop website it lists 7 different part numbers (listed below). The last two in the list are £36 each, does anyone know if these will fit? (RTC4998 and RTC4999). Any help much appreciated

LR017738         
Without lining, LH, Caliper assembly-front brake

LR017742         
Without lining, RH, Caliper assembly-front brake

LR017748         
Without lining, RH, Caliper assembly-front brake

LR017752         
Without lining, LH, Caliper assembly-front brake

RTC3380         
Without lining, RH, Caliper assembly-front brake

RTC3381         
Without lining, LH, Caliper assembly-front brake

RTC4998     
Without lining, RH, Caliper assembly-front brake

RTC4999
Without lining, LH, Caliper assembly-front brake

Pictures of the calipers that are on just now:

IMG_20200621_072429.thumb.jpg.9180ce88c76343e66983b21122bb1f34.jpg

Link to post
Share on other sites

I bought a pair recently I'll add the part numbers of them shortly. 

 

Right front vented caliper SEB500460

Left front vented caliper SEB500470

About 60 quid each plus VAT. 

On both of these the outer faces lower edge fouled the inner face of the hub, a bit of grinder action on both created some clearance. 

Link to post
Share on other sites
  • 2 weeks later...

Your post brought my attention to some parts that would be listed as false positive applications if the part is based on an axle range. This should be fixed now and would have removed a few options from the list you gave above.

Cheers
Will

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy