Jump to content
Chicken Drumstick

Should I cut the the seat boxes or ???

Recommended Posts

My rig isn't the most modded. And I'm restricted to what I can do, due to competing in ALRC events. However I'm pretty pleased with how the suspension performs, given the constraints.

I run a mix of tyres depending on terrain/location/weather, I like to trial on some super narrow 7.00 x 16's more often than not though. They are tall for their width (these examples are almost as tall as a 235/85).

However I have other tyres, sold some big Simex tyres last year that I want to replace and I'm currently sporting a "classic" set of Bronco Grizzly Claws in 285/75R16. This is the first time I've run them since messing with springs last year I think. And I've noticed an issue. They now impact the seat boxes under compression on the rear tub. The tub is slightly lifted from the chassis already. I know the easy fix is longer bump stops, but it kind of goes against my theories in suspension. I like the up travel and don't really want to reduce it.

So I was thinking I could cut the seat boxes and allow for more tyre clearance. I could re-box them in. Only downside is making the bed less usable. Ideally I'd like to create enough space for some 35's, so at least and inch or two taller than what I'm running at the moment.

 

Bit of a crappy picture, you can see the trimmed arch and the tyre stuffed into the bottom of the rear seat box.

vB3QDuB.jpg

 

Just to give the above photo some context:

Ot9cXuI.jpg

Share this post


Link to post
Share on other sites

Both Lewis and daan have done this from memory.

Mike

Share this post


Link to post
Share on other sites

Are you filling your fuel tank with rainwater?😆

Share this post


Link to post
Share on other sites
1 hour ago, JohnnoK said:

Are you filling your fuel tank with rainwater?😆

lol :D

No, the tank is in the bed. The old filler leads no where and is blocked off. Cap is off as I was painting it and have put it back on yet.

  • Like 1

Share this post


Link to post
Share on other sites

How about using spare wheel wells from 109 tub wheel boxes inverted?  They could be replaced by a p,Ian panel in the future, if needed.

Share this post


Link to post
Share on other sites
2 hours ago, Snagger said:

How about using spare wheel wells from 109 tub wheel boxes inverted?  They could be replaced by a p,Ian panel in the future, if needed.

An interesting idea. I guess sourcing them might be the biggest hurdle. I'll have a poke round a couple of the 109's in the field and see. Thanks.

Share this post


Link to post
Share on other sites

Im planning on boxing mine in to clear the 37” treps. I’m also planning on building some storage into either end of each wheel box. 

Share this post


Link to post
Share on other sites

gallery_336_1371_113020.jpg

Definitely a good idea; is this on you series? remember, if the wheels stick out of the body, you need to cut the lip in the wheel arch as well.

Daan

Share this post


Link to post
Share on other sites
26 minutes ago, Daan said:

gallery_336_1371_113020.jpg

Definitely a good idea; is this on you series? remember, if the wheels stick out of the body, you need to cut the lip in the wheel arch as well.

Daan

Thanks Daan. This is my 88 coiler. Arches are already heavily trimmed with wider wheel arch flares on. Looks a tidy job you've done there. :)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy