landroversforever Posted December 2, 2020 Share Posted December 2, 2020 Hi All, I'm plotting and scheming at the moment to utilise a D3 shifter on my 90 project. My copy of RAVE is way too old for the D3 as far as I can remember it only covers up to about D2 age. Has anyone got a copy of the D3 wiring diagrams? specifically relating to what comes in and out of the shifter. Thanks! Quote Link to comment Share on other sites More sharing options...
elbekko Posted December 2, 2020 Share Posted December 2, 2020 Most likely going to be just CANbus, so might be difficult. But I could be wrong. Quote Link to comment Share on other sites More sharing options...
landroversforever Posted December 2, 2020 Author Share Posted December 2, 2020 Hmmm, hadn't thought of that. Will keep looking! My ECU and TCU talk over CAN so shouldn't to too difficult to integrate. Got a couple of clever friends that know their way around CAN who can be roped in if needed. Quote Link to comment Share on other sites More sharing options...
missingsid Posted December 2, 2020 Share Posted December 2, 2020 Here you are, The shifter does not do much, the gearbox ECU in inside the gearbox which is affected by the selector cable. 1 Quote Link to comment Share on other sites More sharing options...
landroversforever Posted December 2, 2020 Author Share Posted December 2, 2020 Thanks for that! Will have a look on my big screen Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.