pugwash Posted January 15, 2007 Share Posted January 15, 2007 Would someone with standard range rover seats mind popping out and measuring the widest points of the seat bases please. Tyring to find some extra wide seats for my fairly large lardy arse and want to make sure that the seats will fit in the gap between the tunnel and the b-pillar. Sods law says i threw my seats away last week! Quote Link to comment Share on other sites More sharing options...
landrover598 Posted January 15, 2007 Share Posted January 15, 2007 560mm from the edge of the winder knob to the edge of the cushion, and the arm rest sticks out 85mm Quote Link to comment Share on other sites More sharing options...
pugwash Posted January 15, 2007 Author Share Posted January 15, 2007 thanks dave that was just what i needed Quote Link to comment Share on other sites More sharing options...
honitonhobbit Posted January 15, 2007 Share Posted January 15, 2007 I make them about 2" to narrow for your arse Quote Link to comment Share on other sites More sharing options...
TJ101 Posted January 15, 2007 Share Posted January 15, 2007 O i wish i had the camera ,, was at the autosport show last week, Think it was Corbeau, but they had a set to fit you Jim, was a show seat, but was about 4/5 foot high, would fit you and Tango in it !! Quote Link to comment Share on other sites More sharing options...
honitonhobbit Posted January 15, 2007 Share Posted January 15, 2007 Esparco used (may still do) to make a seat called the American - it was about 4 inches wider than a normal european seat Quote Link to comment Share on other sites More sharing options...
Mark90 Posted January 15, 2007 Share Posted January 15, 2007 560mm from the edge of the winder knob to the edge of the cushion, and the arm rest sticks out 85mm Dave that's a front seat, can you measure a rear bench seat for Jim Quote Link to comment Share on other sites More sharing options...
landrover598 Posted January 15, 2007 Share Posted January 15, 2007 Your a cruel bunch aren't ya Quote Link to comment Share on other sites More sharing options...
honitonhobbit Posted January 15, 2007 Share Posted January 15, 2007 I think Mr 90 is being a little on the excessive side, Jim's ample backside would only just fill the 60% side of a RRC split rear seat. I have one on the garage Jim, I will run a tape over it tomorrow Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.