Jump to content

Series 2a with a 200tdi fitted with a 300tdi injection pump

Recommended Posts

Hi guys

I have just replaced my Defender 200tdi FIP ( fuel injection pump ) with a 300tdi injection pump, the engine is a Def 200tdi engine that I have dressed as a Disco 200tdi and now fitted with a 300tdi injection pump, the pump seems to pull slightly better from lights and junctions but seems to pull slower through the gears but keeps pulling, with the Def pump I couldn't go into top gear less than 32 mph as the engine laboured were as the 300 pump I can go into top about 25 mph which is better but I will give the pump a better test on the motorway tomorrow but I suppose it's getting used to a std 300 pump as appose to being used to a tweaked Def 200tdi pump so will see tomorrow :)

  • Like 1
Link to post
Share on other sites
3 hours ago, Nonimouse said:

Did you run into any issues with the swap?

Are you running the 200 turbo?

No problem just wasn't sure how to use the timing took kit i bought as it was slighly different to the ones i'd seen but worked in out in the end, using a 300tdi turbo 🙂

Obviously with it being a tdi in a series i had to remove the rad as not much room to work but if it was a Def  or Disco you would probably have the room.

Edited by Cornish Rattler
  • Like 2
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy