Jump to content

Discovery Sport adaptive shocks disabling


Recommended Posts

Hey guys. I just received and changed the 2 rear shock dampers on my Disco Sport 2017. I noticed the new damper did not have the electronic connectors but I figured I never used the option so no need for it. All in all, everything is back as smooth as day one but I do get the annoying "Adaptive dynamics fault" in my dashboard. I own a HSE so I guess what I installed is the non-HSE version.

Any quick tip to disable the warning in the dashboard ? I wonder if the wire shorting trick like the brake sensors work but I doubt it since these wires most likely have control voltage for a small pump versus a simple contact sensor.

A resistor on the wires would probably do the job but can anyone provide me on the electrical specs for this wire strip ?

Thanks in advance !

Link to comment
Share on other sites

  • 3 weeks later...

Thank you BogMonster. It's probably a general adaptive suspension connection. Someone somewhere must know what resistance this little pump needs to stop the onboard system from detecting a problem. :/ 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy