steve b Posted July 27, 2022 Share Posted July 27, 2022 Hi all , Does anyone have a part number and/or size of the the output seal . Sorry about picture quality....but you get the idea Steve Quote Link to comment Share on other sites More sharing options...
Daan Posted August 5, 2022 Share Posted August 5, 2022 Id is 0.75" Daan Quote Link to comment Share on other sites More sharing options...
steve b Posted August 5, 2022 Author Share Posted August 5, 2022 Thanks Daan , I did find a part no. 4-22-1932643 and tried Superwinch but there is no support for mech. winches I'll pull it apart at next convenient time and measure it , my guess would be 1.5" x .75" x .25" Steve Quote Link to comment Share on other sites More sharing options...
Daan Posted August 5, 2022 Share Posted August 5, 2022 57 minutes ago, steve b said: Thanks Daan , I did find a part no. 4-22-1932643 and tried Superwinch but there is no support for mech. winches I'll pull it apart at next convenient time and measure it , my guess would be 1.5" x .75" x .25" Steve Sounds about right. Seals are generic available ones, as are the needle bearings and chains. Daan Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.