landroversforever Posted October 17, 2022 Share Posted October 17, 2022 Another thought, if it becomes a regular thing then everything is likely to be less difficult to remove and that maybe use of an industrial one to start with might sort things and then just top up with either a normal pressure washer or a lower spec hot/steam washer. 1 Quote Link to comment Share on other sites More sharing options...
Escape Posted October 17, 2022 Share Posted October 17, 2022 1 hour ago, Anderzander said: This is the crux of it perhaps.. 🤔 The big ones undoubtedly are better but the size of them poses a problem for me - even if I find one at a bargain second hand price (that isn’t being sold because it’s knackered) - I don’t have the space to store it. Size does matter, doesn't it? Mine is too wide to fit through a standard door (only just...), which meant it always took some shuffling to get it out past the cars and through the garage door. Now it lives outside, under the carport. That works out great, no water inside if it leaks and I don't need to wait for the diesel odor to disappear before storing it. I've also done a bit of math. It takes about 4kW to heat water at a rate of 1 litre/hour from 20°C to 80°C. So those small steamers of about 2.5kW can manage about 0.5 l/hr. Which is a long way from 450 litres/hour! Even a big one wouldn't manage that, but with steam you don't really need a big flow so it's not a problem. The flow rating is no doubt for cold water. It does put things in perspective and explains why most use a diesel heater. 3 Quote Link to comment Share on other sites More sharing options...
reb78 Posted October 17, 2022 Share Posted October 17, 2022 1 hour ago, Escape said: Size does matter, doesn't it? Mine is too wide to fit through a standard door (only just...), which meant it always took some shuffling to get it out past the cars and through the garage door. Now it lives outside, under the carport. That works out great, no water inside if it leaks and I don't need to wait for the diesel odor to disappear before storing it. I've also done a bit of math. It takes about 4kW to heat water at a rate of 1 litre/hour from 20°C to 80°C. So those small steamers of about 2.5kW can manage about 0.5 l/hr. Which is a long way from 450 litres/hour! Even a big one wouldn't manage that, but with steam you don't really need a big flow so it's not a problem. The flow rating is no doubt for cold water. It does put things in perspective and explains why most use a diesel heater. This puts it in perspective I think... A normal electric shower is 9ish kW and thats just a shower at 60ish degrees not exactly high pressure... My diesel hot pressure washer has a double coil inside the furnace/chimney and will heat near to 100C Surely, if you have a hot tap access and can connect a hose with a decent nozzle on it you could do pretty well with that without the pressure aspect - especially with the use of a traffic film remover or similar. I have never pressure washed my engines - perhaps goes back to the days of petrols with moisture sensitive distributors but personally I wouldnt be putting a pressure washer under the bonnet.... Quote Link to comment Share on other sites More sharing options...
Escape Posted October 17, 2022 Share Posted October 17, 2022 Indeed, I considered an electric shower for the Workshop. There rare over here and looking at the power requirements I can understand why. I now have a small electric boiler, 2.2 kW for 15 litres and takes about 20 minutes to get the water nice and warm. Same as you, I stay away from the engine with a pressure washer, but happily use the steam (hot water) cleaner as that is far less pressure and dries up a lot faster. Usually from underneath the car, not through the bonnet. Â 1 Quote Link to comment Share on other sites More sharing options...
Bowie69 Posted October 17, 2022 Share Posted October 17, 2022 Similarly...I'd only be pressure washing an engine if I were about to take it all apart... But then looking back...... I have never owned a diesel vehicle, only ever had a rental van for 6 months. Quote Link to comment Share on other sites More sharing options...
FridgeFreezer Posted October 17, 2022 Share Posted October 17, 2022 I quite often point the pressure washer at my V8's, although not at point-blank range as that's a good way to force water into all the connectors. For a general blasting off of mud after off-roading it's fine, always figure the rotating parts would rather have clean water shot through them than be full of grinding paste. Would love to get the oily bits sparkly clean sometimes but never really found a good way of achieving that that isn't very expensive or labour intensive. Quote Link to comment Share on other sites More sharing options...
Bowie69 Posted October 17, 2022 Share Posted October 17, 2022 2 minutes ago, FridgeFreezer said: Would love to get the oily bits sparkly clean sometimes but never really found a good way of achieving that that isn't very expensive or labour intensive. Plus encourage rust 😛 Quote Link to comment Share on other sites More sharing options...
Anderzander Posted October 17, 2022 Author Share Posted October 17, 2022 I’m certain that for big jobs and prolonged use the little one would be rubbish - but …. this isn’t about doing much at all. Makes me wonder if it’s a bit like using an air compressor for media blasting … where if you are doing little bits you can take your time and wait for the compressor to catch up.  Quote Link to comment Share on other sites More sharing options...
Escape Posted October 17, 2022 Share Posted October 17, 2022 Just spotted an error in my maths (let's call it a typo): It takes about 4kW to heat water at a rate of 1 litre/minute from 20°C to 80°C. So the small ones should manage about 30 litres/hour, which is reasonable for occasional use. 1 1 Quote Link to comment Share on other sites More sharing options...
Nonimouse Posted October 18, 2022 Share Posted October 18, 2022 I have a number of different lance types for my little Karcher. One is a circulating 'blaster' that will remove paint. I use that to remove grease. It was a tenner. Obviously I dowse the grease in Jizer first, then repeat 2 1 Quote Link to comment Share on other sites More sharing options...
FridgeFreezer Posted October 18, 2022 Share Posted October 18, 2022 I bought a chepay ebay 45 degree stainless lance for my karcher with a selection of ends, works lovely for getting under the chassis. 2 Quote Link to comment Share on other sites More sharing options...
Mo Murphy Posted October 18, 2022 Share Posted October 18, 2022 I just live with mine being dirty, it's free 🤪 it's the inside of it I'm more concerning with. Mo 2 Quote Link to comment Share on other sites More sharing options...
Anderzander Posted February 25, 2023 Author Share Posted February 25, 2023 I got one of these 😊 it’s pretty awesome ! 2 Quote Link to comment Share on other sites More sharing options...
steve b Posted February 25, 2023 Share Posted February 25, 2023 Nice find, proper industrial unit. Once you have used it a few times you'll wonder how you ever managed before. Steve Quote Link to comment Share on other sites More sharing options...
smallfry Posted February 28, 2023 Share Posted February 28, 2023 ^^^^ What he said ! Looks very similar to the format of my 20 year old Gerni. Might even have come from the same place. Take a tip though, DON'T lend it to anyone. 1 Quote Link to comment Share on other sites More sharing options...
ThreePointFive Posted February 28, 2023 Share Posted February 28, 2023 Just reading through this. A word of caution on the brake cleaner, some brands/formulas will permanently stain any black plastics you spray it on with a white residue. It could make an engine cover, fuse boxes, etc look like carp on seconds and no amount of back to black will make it right. I ruined a shock tower cover on mine when I forgot this point, despite knowing it beforehand. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.