Tollman Posted October 15, 2022 Share Posted October 15, 2022 Guys, is this possible? straight fit? or am I looking at a ton of mods before that could work? I have both vehicles available. The 2-door (former 3.5 v8, double carbs) is the build. Breaking up the P38 for parts Quote Link to comment Share on other sites More sharing options...
Hybrid_From_Hell Posted October 15, 2022 Share Posted October 15, 2022 If the gearbox is a ZF24 it’s ecu controlled and runs canbus system so hugely tricky to get to work outside donor vehicle 1 Quote Link to comment Share on other sites More sharing options...
Escape Posted October 15, 2022 Share Posted October 15, 2022 The early P38 doesn't use CANbus, but you'll still need the ECU and all the inputs it expects (including from the diesel engine) to get the box to work properly. At the engine side, there is a different torque converter, though you might be able to reuse the one from the V8 along with the bellhousing. At the rear, the transfer box of the P38 sits on the other side, not sure the bolting pattern and output shaft are compatible with the older transfer box. Certainly not a straight fit. 1 Quote Link to comment Share on other sites More sharing options...
Tollman Posted October 16, 2022 Author Share Posted October 16, 2022 13 hours ago, Escape said: Thank you for feedback Quote Link to comment Share on other sites More sharing options...
Carloz Posted October 28, 2022 Share Posted October 28, 2022 (edited) On 10/16/2022 at 12:58 PM, Tollman said: You need an extra hydraulic controlled 4hp22 and mix parts with the 4hp24e: Use bellhousing and gears from 4hp24e and gearbox housing and output shaft (and also output housing) from 4hp22. In this way you end up with hydraulic controlled 4hp24. Edit: uhm.... I was dreaming that you wanted to fit the ZF together with the M51! Edited October 28, 2022 by Carloz Quote Link to comment Share on other sites More sharing options...
ashtrans Posted November 7, 2022 Share Posted November 7, 2022 auto or manual ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.