Eddie Posted January 28, 2007 Share Posted January 28, 2007 B) Hi All, Just bought my latest project, Series 2 SWB petrol in need of some TLC, However,It's got a rear coil spring set up on it with leaves at the front any info regarding this would be useful. I'll post some pictures when I can. Ed. B) Quote Link to comment Share on other sites More sharing options...
LR90 Posted January 28, 2007 Share Posted January 28, 2007 Welcome to LR4x4 Ed, I think you might fit in well round here. leafer/coil hybrid, that's got to be worth a few pics. What info are you looking for? Quote Link to comment Share on other sites More sharing options...
bill van snorkle Posted January 29, 2007 Share Posted January 29, 2007 Is it a full rear coil conversion using Range Rover rear axles /springs etc? I recall a conversion that was offered a few years back that employed very thick single leaf springs as control arms that extended about 8 inches behind the rear axle, and the coils sat on these extensions and directly under the chassis rails. A bolt on panhard rod was also used. This conversion retained the standard narrow series LandRover leaf spring type axle assembly. The arrangement was very similar to many air suspended trucks (Lorries) except for coils instead of air bags. Bill. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.